###Breaking TMD Demo car ~ new parts added###

[sanchez]

I will see what interest there is over the next few days than may split

ok nice one mate wull keep an eye on this thread.
might be a few bit i want

 

[Dave@TM-developments.com]

I have had my arm twisted to sell a few other bits so all these are now available

TRD Engine mounts SOLD
Greddy front strut brace SOLD
Greddy Rear strut brace SOLD
Engine Damper SOLD
2 Corbeau Forza sport seats 150
Drivers Bride seat rail 100
2 X Border Green harnesses 150
Fuel pump 255lt 50
Fuel reg FSE comp 70
TRD Quickshift SOLD
Ali rad with fan (full size) 150
Rad hoses blue 20
Front exit exhaust 100
Dash pod with Aem Oil temp and press gauges 200
Pillar pod with AEM Wideband gauge and Tru boost controller 300
24mm Front ARB SOLD
ALK 30
BC Coilovers (300 miles) 500
Brake kit SOLD
Rear discs 6 groove 50
Battery with boot montted kit 100
2 X Black with blue lip GT3’s 15” with 225/50 R888 250

2XBlack with blue lip GT3’s 16” with 185/50 Proxies 200
2 X 15”x8” Rota RB’s with new Mickey Thompson 22 x 8 x 15 slicks 400

All prices are plus delivery or can be collected

 

[Fizturbo]

Dave am intrusted in the Rad hoses blue an if not sold then also TRD Quickshift ,can i phone you on monday an pay over phone.
Also what is the make of the exaust?

 

[Dave@TM-developments.com]

Shell sold

 

[sanchez]

and ARB sold too dave

 

[Dave@TM-developments.com]

 

[Dave@TM-developments.com]

Engine

75mm Wiseco pistons (1538cc)
TMD Precision forged 4340 EN24 aircraft chrome moly steel Rods
Block skimmed and notched for rods
Full race ported head, 3 angle valve grind
Head skimmed
Block crack tested
Fully lightened balanced and knife edged crank
Lightened 5e flywheel to take 4e clutch
Exedy cerramettalic paddle clutch
265 Billet camshafts
Cruise valve springs
Race spec rocker cover with catch can
New oil pump
New water pump
Alloy anodised crank pulley (Single pulley for no P/S)
Zep Racing 2mm head gasket
New head bolts
New oil pressure sender
Cusco oil sandwich plate (for gauges) £3500


Intake

Custom alloy inlet manifold & 80mm aluminium throttle body and Auto TPS SOLD
Sard 550cc Injectors SOLD

Turbo

Cruise Exhaust Manifold £750
Tial 40mm External wastegate £150
TD06 Green Turbo £350
Screamer pipe

ECU

HKS F-Con V Pro complete with 2 maps by AFR Tuning
Cruise F-Con loom (Plug and play)
HKS 3 bar map sensor
HKS map sensor Loom
Launch control compatible £1000


Gearbox

Fully rebuilt Gearbox
Quaife ATB LSD
Zep Racing spherical Linkage bushes £750


TRD Engine mounts SOLD
Greddy front strut brace SOLD
Greddy Rear strut brace SOLD
Engine Damper SOLD
2 Corbeau Forza sport seats 150
Drivers Bride seat rail 100
B&M White gear knob with button 50
Rear line lock solenoids with lines 100.00
2 X Border Green harnesses 150
Fuel pump 255lt 50
Fuel reg FSE comp 70
TRD Quickshift SOLD
TRD Ignition leads £80
Ali rad with fan (full size) 150
Rad hoses blue 20
Front exit exhaust 100
Dash pod with Aem Oil temp and press gauges 200
Pillar pod with AEM Wideband gauge and Tru boost controller 300
24mm Front ARB SOLD
Adjustable Panhard rod £50
BC Coilovers (300 miles) SOLD
Brake kit SOLD
Rear discs 6 groove 50
Battery with boot mounted kit 100
2 X Black with blue lip GT3’s 15” with 225/50 R888 250

2XBlack with blue lip GT3’s 16” with 185/50 Proxies 200
2 X 15”x8” Rota RB’s with new Mickey Thompson 22 x 8 x 15 slicks 400

All prices are plus delivery or can be collected

 

[Starlet_Sam]

Fuckin hell Dave, you must be losing a fair whack on this.

 

[Shorty]

cant get over the prices of these parts! loads of bargins this is mad! this car sooo should not of been broken it should be mag featured and shown off on tracks all around the uk

 

[whiteglanzav]

coilovers sold to me

 

[Dave@TM-developments.com]

Engine

75mm Wiseco pistons (1538cc)
TMD Precision forged 4340 EN24 aircraft chrome moly steel Rods
Block skimmed and notched for rods
Full race ported head, 3 angle valve grind
Head skimmed
Block crack tested
Fully lightened balanced and knife edged crank
Lightened 5e flywheel to take 4e clutch
Exedy cerramettalic paddle clutch
265 Billet camshafts
Cruise valve springs
Race spec rocker cover with catch can
New oil pump
New water pump
Alloy anodised crank pulley (Single pulley for no P/S)
Zep Racing 2mm head gasket
New head bolts
New oil pressure sender
Cusco oil sandwich plate (for gauges) £3500


Intake

Custom alloy inlet manifold & 80mm aluminium throttle body and Auto TPS SOLD
Sard 550cc Injectors SOLD

Turbo

Cruise Exhaust Manifold £750
Tial 40mm External wastegate £150
TD06 Green Turbo £350
Screamer pipe

ECU

HKS F-Con V Pro complete with 2 maps by AFR Tuning
Cruise F-Con loom (Plug and play)
HKS 3 bar map sensor
HKS map sensor Loom
Launch control compatible £1000


Gearbox

Fully rebuilt Gearbox
Quaife ATB LSD
Zep Racing spherical Linkage bushes £750


TRD Engine mounts SOLD
Greddy front strut brace SOLD
Greddy Rear strut brace SOLD
Engine Damper SOLD
2 Corbeau Forza sport seats 150
Drivers Bride seat rail 100
B&M White gear knob with button 50
Rear line lock solenoids with lines 100.00
2 X Border Green harnesses 150
Fuel pump 255lt 50
Fuel reg FSE comp 70
TRD Quickshift SOLD
TRD Ignition leads £80
Ali rad with fan (full size) 150
Rad hoses blue 20
Front exit exhaust 100
Dash pod with Aem Oil temp and press gauges 200
Pillar pod with AEM Wideband gauge and Tru boost controller 300
24mm Front ARB SOLD
Adjustable Panhard rod £50
BC Coilovers (300 miles) SOLD
Brake kit SOLD
Rear discs 6 groove 50
Battery with boot mounted kit 100
2 X Black with blue lip GT3’s 15” with 225/50 R888 250

2XBlack with blue lip GT3’s 16” with 185/50 Proxies 200
2 X 15”x8” Rota RB’s with new Mickey Thompson 22 x 8 x 15 slicks 400

All prices are plus delivery or can be collected
__________________

 

[_GAZ_EP85_]

will take the panhard rod mate,

 

[Gtstu]

deffo have the seats and runners will pm you to arrange collection.

 

[Barretta]

Intake manifold, auto tps, injectors and modified fuel rail for me:beer:

thanks Dave.

 

[Dave@TM-developments.com]

Engine

75mm Wiseco pistons (1538cc)
TMD Precision forged 4340 EN24 aircraft chrome moly steel Rods
Block skimmed and notched for rods
Full race ported head, 3 angle valve grind
Head skimmed
Block crack tested
Fully lightened balanced and knife edged crank
Lightened 5e flywheel to take 4e clutch
Exedy cerramettalic paddle clutch
265 Billet camshafts
Cruise valve springs
Race spec rocker cover with catch can
New oil pump
New water pump
Alloy anodised crank pulley (Single pulley for no P/S)
Zep Racing 2mm head gasket
New head bolts
New oil pressure sender
Cusco oil sandwich plate (for gauges) £3500


Intake

Custom alloy inlet manifold & 80mm aluminium throttle body and Auto TPS SOLD
Sard 550cc Injectors SOLD

Turbo

Cruise Exhaust Manifold £750
Tial 40mm External wastegate £150
TD06 Green Turbo £350
Screamer pipe

ECU

HKS F-Con V Pro complete with 2 maps by AFR Tuning
Cruise F-Con loom (Plug and play)
HKS 3 bar map sensor
HKS map sensor Loom
Launch control compatible £1000


Gearbox

Fully rebuilt Gearbox
Quaife ATB LSD
Zep Racing spherical Linkage bushes £750


TRD Engine mounts SOLD
Greddy front strut brace SOLD
Greddy Rear strut brace SOLD
Engine Damper SOLD
2 Corbeau Forza sport seats 150
Drivers Bride seat rail 100
B&M White gear knob with button 50
Rear line lock solenoids with lines 100.00
2 X Border Green harnesses 150
Fuel pump 255lt 50
Fuel reg FSE comp 70
TRD Quickshift SOLD
TRD Ignition leads £80
Ali rad with fan (full size) 150
Rad hoses blue 20
Front exit exhaust 100
Dash pod with Aem Oil temp and press gauges 200
Pillar pod with AEM Wideband gauge and Tru boost controller 300
24mm Front ARB SOLD
Adjustable Panhard rod £50
BC Coilovers (300 miles) SOLD
Brake kit SOLD
Rear discs 6 groove SOLD
Battery with boot mounted kit 100
2 X Black with blue lip GT3’s 15” with 225/50 R888 250

2XBlack with blue lip GT3’s 16” with 185/50 Proxies 200
2 X 15”x8” Rota RB’s with new Mickey Thompson 22 x 8 x 15 slicks 400

 

[Mikey B]

Thanks mate

 

[Dave@TM-developments.com]

Thread tidied

 

[Dave@TM-developments.com]

Engine

75mm Wiseco pistons (1538cc)
TMD Precision forged 4340 EN24 aircraft chrome moly steel Rods
Block skimmed and notched for rods
Full race ported head, 3 angle valve grind
Head skimmed
Block crack tested
Fully lightened balanced and knife edged crank
Lightened 5e flywheel to take 4e clutch
Exedy cerramettalic paddle clutch
265 Billet camshafts
Cruise valve springs
Race spec rocker cover with catch can
New oil pump
New water pump
Alloy anodised crank pulley (Single pulley for no P/S)
Zep Racing 2mm head gasket
New head bolts
New oil pressure sender
Cusco oil sandwich plate (for gauges) £3500


Intake

Custom alloy inlet manifold & 80mm aluminium throttle body and Auto TPS SOLD
Sard 550cc Injectors SOLD

Turbo

Cruise Exhaust Manifold £750
Tial 40mm External wastegate £150
TD06 Green Turbo £350
Screamer pipe

ECU

HKS F-Con V Pro complete with 2 maps by AFR Tuning
Cruise F-Con loom (Plug and play)
HKS 3 bar map sensor
HKS map sensor Loom
Launch control compatible £1000


Gearbox

Fully rebuilt Gearbox
Quaife ATB LSD
Zep Racing spherical Linkage bushes £750


TRD Engine mounts SOLD
Greddy front strut brace SOLD
Greddy Rear strut brace SOLD
Engine Damper SOLD
2 Corbeau Forza sport seats SOLD
Drivers Bride seat rail SOLD
B&M White gear knob with button 50
Rear line lock solenoids with lines 100.00
2 X Border Green harnesses 150
Fuel pump 255lt 50
Fuel reg FSE comp 70
TRD Quickshift SOLD
TRD Ignition leads £80
Ali rad with fan (full size) 150
Rad hoses blue 20
Front exit exhaust 100
Dash pod with Aem Oil temp and press gauges 200
Pillar pod with AEM Wideband gauge and Tru boost controller 300
24mm Front ARB SOLD
Adjustable Panhard rod £50
BC Coilovers (300 miles) SOLD
Brake kit SOLD
Rear discs 6 groove SOLD
Battery with boot mounted kit 100
2 X Black with blue lip GT3’s 15” with 225/50 R888 250

2XBlack with blue lip GT3’s 16” with 185/50 Proxies 200
2 X 15”x8” Rota RB’s with new Mickey Thompson 22 x 8 x 15 slicks 400

All parts + del. or can be collected

 

[dac69er]

what make is the panhard rod dave?

 

[Dave@TM-developments.com]

Whiteline Duncan