Recent content by John@elitemobilesecurity

Hi im looking to become a registered trader, I have sent a few messages but heard nothing back yet. Can some one advise please!

You can use the Amp power wire but I recommend switching your neons through a relay. This will totaly isolate your neons from the amp causing no interferance

Hi if your going to buy amp and sub pack it should come with a suitable wiring if not whoever you buy it off should be able to advise you what you need. All good kits come complete with simple wiring diagrams and all the connectors you will need. As for disconnecting the battery this isnt...

Hi do you know if it was fitted in the UK. If not is it possible for you to take picture of the siren and does it have one wire or twin cables coming out of it ?

Rpm and injector wire give the same kind of pulses so either will do but rpm wire is much more accurate !

If your car is a Import then it wont have a fog light,you need to put one on. Go to your local auto electrical supplier get a fog light some twin core cable and a aftermarket swith that illuminates when on then all you have to do is fit it !

Hi sounds like your in a right pickle ! You wont find anything that goes to 12v when the key is out,you must have connected something wrong somewhere or have a faulty unit. What make is the alarm your trying to fit ?

Hi what clifford alarm do you have fitted ? There are several types of siren available it sounds like yours has a back up battery problem that causes it to arm and disarm ok but not sound when in alarm state. Get back to me with model of alarm and I will advise more.