Recent content by morepower

done the basics, replace fluid, bleed, checked pads and discs all good but there still is an issue.:confused:

hi guys I've got a uk starlet with a GT engine in it. Since i've added the new engine i've notice the standard brakes are not as good as before so i've up graded and added GT turbo front discs and calipers but it is still not that good even when i plant my foot on the brakes the car will not...

Hey guys. I've just put a GT engine in a u.k Starlet and I've got one connector left and i cannot find where it connects to. Please see link below. The one marked 'A' has wires connecting to 'B' and 'C' (they are abit small pls look hard). I need to know where 'A' connects.Cheers guys...

cheers guys!

I'll have to watch what i buy then, cheers for that!

Hi guys, does any body know the outter dimension of the turbo inlet pipe on a standard GT turbo unit? As i want to add a 90 degree silicone or any other pipe to the turbo for a filter and want to buy it before i remove the old bits to save time. also any body know where i can get a pipe from...

what does he mean by the 23/23 or 23/30 difference?:confused:

i know what i'm doing tomoz now! cheers

Hello guys, I'm having the common problem of a smokey engine. The engine is giving a white/gray smoke off when i put my foot down and it smells of oil but the turbo pulls o.k. I think it could be the seals in the turbo but i'm not a mechanic. The PCV has also been checked and it is loose but...

Hey guys, Would EP82 turbo front hubs fit onto a UK EP91 as a replacement? cheers morepower!!:quadgt:

Hey guys, I took the exhaust off from were it connects to the CAT' and it exposed a braided like metal band which was sticking out the center of the bottom of the cat'. Is this normal or not? morepower!!

yer they are abit naff but i know they are popular in hot,dry and sandy places to prevent discolour to the dash and so that you can just shake the sand of it. Still naff. ;)

Alright guys n gals i'm after a front mounted intercooler with piping if possible. It's going on a Ep91.PM me! cheers morepower! :cops:

Hi guys, does any body know if a fuel pump from a ep82 GT fit a standard UK EP91 car as i am doing a turbo conversion. cheers Morepower!:ep91:

Hi guys as the title says would a engine loom from a EP91 glanza 4efte fit a EP82 4efte engine with a EP91 interior loom? :confused::cops: