Recent content by muz_z

Thanks for the reply the fan info is very helpfull Just in general if you we're going to wire any aftermarket ecu to the 4efe distributor would you use the NE+ as the trigger from the diagram you posted above and the IGT as the ignition output from the ecu?

Ok think I have finally worked it out Can some just confirm this My trigger from the ems ecu is a green shielded wire from what I can work out it goes to the NE+ pin 21 on the 4efe ecu and the ignition output wire from the ems is a pink wire from what I can work out it goes to IGT pin 6 on the...

Ah that's what I needed thanks WEEJOHN very helpfull

Thanks for the reply Weejohn But I have had another look in the awesomely helpfull section and can only find things that relate to 4efte Am I missing something somewhere

I am installing a ems 8860 standalone ecu on a 4efte and have worked everything out except the wiring for the trigger and sync (home) wiring to the new ecu It is a 4efe harness I am running a 4efe distributor with internal coil are they a 4 tooth trigger ? Can someone point me to a wiring...

does anyone have the link or saved the Pdf file they can put back up as this one is dead and i would like to get my glanza dash working properly thanks