Recent content by racer5e

bump

Bump

No, i have a 4E but i'm using the 5E P/S pump and A/C compressor. Just need the 4E tensioner so it can clear the oil filter.

Hey All I'm looking to buy the a/c and p/s belt tensioner shipped to the states. actually might be interested in the full p/s pump and mount, a/c compressor and mount, and of course the tensioner. Currently i'm trying to use the one that came with my 95 Tercel but if they dont work for some...

bump anyone?

Interested in your speedo converter. this is to convert kph to mph correct? would you ship to the states?

Hey lads, I'm looking for the engine and gearbox mounts for an EP91 to use in my Tercel. I ordered some PowerFlex mounts but did not realized that the Tercel Mounts I.D. is larger so i can't use them. Anyone have these available? Need them shipped to the states. Thanks

If you want better traction, then get the anti-lift plates. If you want better cornering then get the lower arm bar.

yes, we use the same suspension parts as the starlets.

yes it would work!

also the green wire is not going to be green. mine is pink BTW im the one that made that diagram. make sure you give you self enogh wire from the plug, about 2.5-3 inches. good luck! :)

wow alf, congrats!

Hey guys, i would like to adjust my valve clearance tommorow before I go to the track. does any one here know what its supposed to be set at? Thanks!

I just wanted to know what the stock WOT timing is so we can base of off that. Are tunning my car on the street so is not like if we were on a DYNO to check base timing. Any one else with some insight?

bump:)