This is my Mazda RX7 intercooler on my Micra
Should i use an electric fan or would this work for 12psi boost???
http://i258.photobucket.com/albums/hh279/SugarplumShania/100_0545.jpg
http://i258.photobucket.com/albums/hh279/SugarplumShania/100_0546.jpg...
Can anyone advise me on the size of exhaust i should use on my Micra with a starlet engine upgrades: Standard Exhaust that is ported with TD04 fuel regulator, Haltech Management.
The Micra has two 90 degree bend
should i use 2.5 exhaust or 2.25??????
I'm looking at running 12psi...
What sort of ign. timing should i run on my starlet engine with TD04 12psi fuel regulator, walbro pump, Haltech Engine Management?
What will be safe to run street/race ?
What size of line should I use to supply my engine out of a walbro fuel pump?
Whould 3/8 be ok?
What sort of fuel pressure should i run with stock injectors on TD04 12psi.
1) I am fitting the walbro pump in my car, i would like to know what size of fuel line i should run.
2) What size injectors is recommended for my application?
Port and Polish Exhaust Mani.
Fuel Regulator
2.25 exhaust
TD04 Turbo
Haltech Engine Management
12psi boost
Approx...
hi will a RB 20 injectors work in my starlett engine running TD04 with 1 bar boost, what size are these injectors?
What size are the injectors on the starlett?
My actuator on my TD04 is not functioning i need to get a new one, can anyone reccomend one for me, what brands are available and how it works.
I am trying to get my boost as early as possible around 2500rpm.
What Actuator should i use????????
Can anyone tell me if i can use my stock injectors on the 4E, i am using a Td04 with a Haltech Engine Management and running 12psi of boost.
I also have a set of RX7 550cc injectors should i use these?
Any advice??
These are some pics. of my downpipe for the starlett engine running the TD04 on my Micra. What do you think about it? Suggestions would be appreciated, what about the size how do you think it will work??
1) Response
2) Midrange
3) Topend
4) spooling response
Thanks Dave
Thanks Dave for the advice very informative!!!
Off to work will keep you posted on the developments, the Haltech should be wired by weekend. Fingers Crossed
This car is my hobby, but my real project is a MKI Escort with 2.0 pinto engine with injection.
Front Mount
I don't want run the front mount because i will have to do some piping under the car, i don't want to do that. Also if i run it on the inside i will have to get rid of the A/C i am not doing that.
It is on a MICRA K10
Is it ok to run my top mount Starlett intercooler with a TD04 at 12psi or should i change to a larger top mount? If so can anyone recommend one.
I can't use a front mount due to the space. (It's on a Micra):confused: