rad fan

[Ghost 12]

Hello



i have the Problem if i turn the ignition on the fan runs.

i heard the Problem started if you put the AC out of the car.



So my AC is out.



So what can i do that the fan runs right only if the car is warm ?

it`s a ep95 with a glanza loom and a 5efte motor



Thanks to ALL

 

[dac69er]

link out or refit the pressure switch that would have gone onto your aircon pipework. do a search as it has been covered lots in the past.

 

[Ghost 12]

Hello so i have connected and not connected but still the same problem.
have also connected the ac fan but the same shit.
please help me

thanks

 

[Jay]

If the connection to the fan switch is broken or the switch itself is faulty you should get the same problem.

Might be worth checking if the aircon pressure switch connection is already bridged.

Jay

 

[Ghost 12]

Thanks Jay i will check it.

 

[mossie477]

I thought it was only gt models which had to be bridged . I had this problem on my glanza recently turned out to be a bad temperature switch on the thermostat housing. It is a green plug on mine

 

[Ghost 12]

Hmm ok thats the next Problem.
i have a white one inside with a white plug but i dont know the partnumber can anyone help?

thanks

 

[Jay]

If you can post a pic we can advise better mate. Think the earlier 4EFTE's had a white plug.

 

[Ghost 12]

ok so thats the picture

did anyone can help me with the partnumber?

thanks