Search results

I've got some yellow koni's on my glanza, and it doesn't crash over bumps and handles very nice. I've got other springs, but theye are really cheap. Front is set to the maximum, and back is on the softest setting. But have a rear anti roll bar to, that seems to do the trick

Unscrew the screws top and bottom on the brackets, pull the whole assembly out, and unscrew the stereo unit from the brackets. Piece of pie. To topic starter, in the first picture, left and bottom bracket fit in place, with the holes for the screws on the places where the holes in the dash...

Top mounts are sold to me :D

Hy Mate Interested in the rocker cover, seal and breather filter. Could je pm me the best price delivered to europe? Thanx

I'll take the springs and topmounts for 150..

Is it an idea to get a brake pedal switch and mount it in the same way as the brake?

Hy Mate Can you pm me the best price delivered for the topmounts to europe? Thanx

I'll take the top mounts off you for 100, can you send me a pm? Have to be posted though

For valve clearance you need to take the rocker cover off, and check if the clearance is still within spec. If not, you have to get some shims that put it back in specification.

Have a look at the part where the filler pipe connects to the tank, there is a round flence (don't know how to say it in english) with some bolts. My old ep8 was leaking from the top of this, but only with the tank full more than 3/4. Fill her up and find out where it comes from, you don't want...

ok no worries! Thanx anyway!

Do you still have the headlights? Are they for sale? What's the condition? Cheers

Hi mate. Do you have headlights for sale? If so, what's the condition? Cheers

Do you still have the headlights? if so, what's the condition? Cheers

Which part of the plastic is misshing from the passenger headlight? Cheers

Do you still have both headlights? What's the condition? Any broken mounting points? Thanx

Central locking? Had the same with my glanza when it was in the garage. Opened it with the key, because the battery wasn't in it, only 1 door opened. Connected the battery, car wouldn't start. opened and closed the glanza from the outside, with remote or key and the car starts instantly. And...

Just put a big plier on it, with a good grip. Make sure the rubber booth is out of the way, and prepare for sweating upside down. But it's do-able. I've replaced both of the track rods with the steering knuckles that connect to the hub, Just remember to put the steering knuckle on the same...

Do you also have coilovers that are up 4 sale?

The oil pressure light? If so, gt and glanza are the same. Screw the old one out, new one 1 and reconnect the lead.