Search results

  1. wildchild

    WANTED: GT Map Sensor 89420-10050

    Iam looking for a working GT Map sensor with part number 89420-10050 Pls let me know if anyone has. Cash waiting.. Thanks alot.
  2. wildchild

    WANTED! Oil Filter Bolt, Gbox mount, Shifter, center shroud & More

    Hi Guys. Iam looking for the following parts for an EP82.. * Oil filter bracket center bolt * CT9 oil return line * CT9 water Lines * Camshaft bolts * intake plenum rubber hose which fits to TMIC at throttle body * CT09 cold air intake (aftermarket) or stock intake hose (plastic) * Gearbox...
  3. wildchild

    WANTED EP82 GT instrument cluster in any condition

    Wanted EP82 GT instrument cluster in working condition or for parts. Pls let me know. Thanks.
  4. wildchild

    WANTED: E-MANAGE Blue & injectors & MAP sensor

    Looking for an e-manage blue with harness & either 300cc, 330cc or 340cc or similar capacity range injectors. Also on the lookout for a turbo MAP sensor (89420-10020 or 89661-10040) Need them posted to Sri Lanka. Pls let me know. Thanks in advance :)
  5. wildchild

    Aftermarket Highlift cams - Help!

    Hi guys. i have a GT running a fully forged 5EFHE engine. standard ignition, GT28R bb turbo on WEPR godzilla manifold. It made only 203HP at 1bar boost on octane 95. Here in SriLanka i guess that it's actually equivalent to octane 90. Thereafter i fitted the 265/265 8.7mm lift speedvision...
  6. wildchild

    Chassis number HELP!

    Guys i bought a standard ep82 GT (conversion) and there seems to be a problem in the MAP sensor. I need a MAP sensor with the number 89661-10040 (MA5450) Since i couldnt find a used one i want to order a new one from the toyota dealer and for that i need the VIN or chassis number of an...
  7. wildchild

    Wanted 89661- 10040 MAP Sensor

    Wanted starlet turbo MAP Sensor As above im looking for a starlet GT/Glanza Map sensor. :( Looking for the MAP with the number 89661-10040 OR 89420 - 10020 Need it posted to Sri Lanka. Pls do let me know if any of you guys have. Thanks :)
  8. wildchild

    Wanted OEM 4EFTE single Piston & Rod + Thermostat housing

    As above im looking for a used oem 4efte single piston and con rod as well as a thermostat housing (swirl pot) and an oil filter housing. Need it posted to 20060, Kandy, Sri Lanka. Pls let me know as im in a bit of a hurry. Thanks for your time.
  9. wildchild

    Uprated Billet Cams Help!

    Hi everybody. im running 5EFHE cams in my 5EFTE. now im thinking of going for the speedvision billet cams. The specs are as follows: Duration: 265 degree intake / 265 degree exhaust. Lift: 8.7mm intake / 8.7mm exhaust. Whereas in the 5EFHE the intake is 240 compared to 224 in the...
  10. wildchild

    4EFTE Oil Filter housing & Extra bolt wanted

    Hi guys. I need a 4EFTE oil filter housing with center bolt and an extra bolt & a water swirl pot (Thermostat housing). Need them posted to Sri Lanka. Pls let me know price & postage. Thanks. Regards Shehan.
  11. wildchild

    My Kouki EP82 GT pics

    1995 kouki Ep82 GT, 5EFHTE fully forged http://youtu.be/Et7fz2-q1Jg http://youtu.be/-njLKbCmPnU
  12. wildchild

    Help! Sera 4EFTE swap engine misfiring

    Hi. I swapped in a 4efte to my sera. was running the 5EFE earlier. Im temporarily running the stock wire harness, stock alternator, stock distributor and stock ecu. the turbo outlet is not connected to the intake mani. its just open and i have connected the stock TB hose to the air cleaner box...
  13. wildchild

    Rear disc brake conversion

    Im looking for an EP82 or EP91 rear disc brake conversion for my drum setup. Need the discs, calipers, caliper holders, caliper brackets, and the bolts. Need them posted to Sri lanka :) Let me know. Thanks. Cheers!
  14. wildchild

    Wanted 4EFTE Oil filter housing & water temp sensor adapter

    Guys im looking for the oil filter housing/adapter for the 4efte engine as well as the thermostat housing/adapter (the one which the temp sensors are fixed & lower radiator hose) Wouldnt mind if i get two of each item. Need it posted to Sri lanka. pls let me know. Thanks alot :) Cheers.
  15. wildchild

    5E rods

    im currently running 1.2bar on a 5e engine with 4efte pistons and 5efhe rods with a TD04 with 440cc injectors managed by a greddy emanage blue. i need to get forged pistons and rods coz i want to boost above 1.5 to 2bar. will my 5EFHE rods survive upto 2bar? first of all will my TD04L be able to...
  16. wildchild

    Wanted 5E forged rods and 4E or 5E forged pistons

    Hi ppl. i need a set of 5E forged rods and pistons. pistons could be either 4E or 5E. need them shipped to Sri Lanka. please let me know. Thanks alot :) also on the lookout for a GT instrument cluster and stage 1 clutch kit. NOTE: im currently running 1.2bar on a 5e engine with 4efte pistons...
  17. wildchild

    Help needed regarding 5EFHE, 4EFTE and 4E engine & parts swap

    Hi guys. i own an ep82GT. i also own a sera. and i also have a 4e engine lying around. my project is- Stage 1= Remove the 5EFHE from the sera. pop in the 4E engine. Stage 2 = Then dismantle the 5EFHE and the 4EFTE from my ep and turbocharge the 5EFHE and fix it to the starlet. The wire...
  18. wildchild

    Gearbox & engine mount issue

    Is there any difference between the EP82 engine and transmission mount from a turbo and a non turbo? there are so many uprated mount sets available from various sellers for the ep82 GT. will these fit the N/A version? if not whats the difference? Mines a non lsd. Ideas needed :)
  19. wildchild

    Help! 5e conversion dilemma

    Hi guys. ive got an ep82 and i recently bought a sera as well. im in the process of swapping both engines and plan to turbocharge the 5e and fix it to the starlet. Anybody knows which tranny is better? the 5efhe or the 4efte? (manual) Any difference in gear ratios? plus is there a...
  20. wildchild

    Wanted used fuel pump, Springs and TD04 hybrid turbo in good working order

    Wanted a used or new sard or any other high performance 255lph fuel pump and a TD04 hybrid turbo in good working order. A custom manifold that fits the tdo4 is required as well. (external wastegate) Also on the lookout for two front shock absorber springs (hard) or adjustable coilovers and an...
Top