Search results

need standard turbo intake pipe from turbo to cone.the pipe with efi writtin on it.thanks my numbers 07500118222

hi there.right first things first ive got a 96 glanza turbo just had fully recon engine from mr.engine witch included all gaskets,seals,bearing,rings and shims stainless mannifold speedvision ct9 hybrid,3 inch de-cat full stainless,avcr boost controller,g-reddy emange and front mount intercooler...

Ive got a ep91 just had new 4 paddle clutch and lightend flywheel fitted along with full recon engine and new turbo so box and block has come out.Everthing was fine for about 5 mins n then it didnt want to go into 4th just felt like there was no gear there and finally managed to get it in after...

Could someone post a picture and/or instructions on how to fit rrfpr as i took mine off and in the process of me putting my engine back in ive lost my camera .So ive got a load of pipes but im not sure where they go!!!Also im havving problems when tryin to start the engine ie. the car is over...

Have just fitted a dave burwash air filter relocation .But weni was fitting i noticed that there are 5 pipes that normally connect to the efi pipe.2 commin off the bottom of the solenoid,one commnin off a pipe next to the cam gears cover,and two commin off the top of the solenoid.Any help...

Yes yes.Just a few quick questions.Here we go.Glanza V Turbo 1996 ep91 4efte 1. I ve just had a recon engine unit from mr.engine.net(silver recon, if any one is familiar with the company)low milage aparantly!!!!.It has had head gasket replaced,big end bearing and new cylinder head.All...

Just recieved my new engine.From mr engine - silver series recon looks mint as fuk.Gaskets and seal replaced and compression tested.6 months waranty for £525 delivered.Have bought new 4 paddle act racing clutch-lightened fly and trd engine mounts ,polished intake,fmic,new turbo,stainless...

I can buy 5 Garrett T205-04 turbos but was wondering if any one would be interested as they are for a land rover 300tdi and dont no if they would be any use to starlet pimps or if you can only use them on diesels.They are brand new in box.Any help asap thanks

Am on the hunt for some nice coilovers and seen this TEIN HA COILOVER KIT for £417 deliverd.They are used bur are sed to have passed an inspection test and are from a reputable seller with very good feedback.Over 7000.Are these any good because i cant seem to find any on sale anywhere.Any help...

Im currently running a greddy e-manage ecu but have no idea if it has map sensor or injector harness or any extras.How could i find this out?Is it a big job to swap exhaust from ep92 to ep91 and how long does it take(selling my ep82 on friday and need to get the turbo back exhaust off and put it...

Need some uprated engine mounts asap as new block going in at end of month.Thanks

3 Quick questions 1-How can i tell if my turbo is hybrid or standard? 2-How can i tell if i have sard 550cc injectors? 3-How can i remove my a/c for air filter relocation? Thanks starlet pimpernerll

Yes yes. Unfortunatly a few weeks ago i blew me engine.TWAT.Still runs but smokes from crank case breather, dipstick ,exhaust and drinks oil 4 joke. And then last weekend i thought i would take it for a spin to the local polish car wash to get the oil stains off the back before the new engine...

Yes starlet pimpernells, Needing a new engine n was thinking bowt going for fully forged and have seen the one on starletgtturbo but was wondeing if anyone new or has had one of these or any where else to get one from.Any help appreciated cuz wanna get the ball rolling soon as.Thanks

Blew up me glanza two weeks ago GUTTED and have finally sorted out a replacement block(£525 delivered with all new gaskets bearings compression tested low milage and 6 month guarante from mrengine.net) And was wondering if theres anything i should change or would be best to change while block...

Yep took it garage and bottom and top end fukd.Is there any1 who can help me with rebuild or new block ep91.Any help appreciated.cheers lads

Need ep91 engine .good condition low milage .Blew mine up.Thanks

Yes starlet pimpernells, Big problems,ive got a 1996 glanza running out 180bhp ,got all the tweaks hybrid turbo,greddy emanage,avcr boost controller,frontmount,re mapped ecu.Was running perfectly untill yesterday when i took out on the bybass for a good old boost.Got back into town pulled...

yes yes. Ive just bought my new glanza n reg.Its got hybrid turbo,stainless mnifold with decat downpipe,sard 550cc injectors,front mounted intercooler,hks actuator,avcr boost controller,fpr,and greddy e-manage ecu mapped and running 180.7 bhp.But was wondering if i needed a s-afc with it or will...

Yes yes. I have a ep82 1993 with abs and bought drilled and grooved front disks with ebc yellow stuff pads and standard disks and pads for the back but unfortunatly threw a piston the other week so went out and bought a glanza ep91 1996 also with abs and was wondering if they would fit on the...