Search results

Afternoon all, Could any of you guys help me with a tapping noise I have noticed. I cannot hear the tap whilst the engine is idling, only when revved, I know there is a tapping noise coming from one of the injectors which stops when the engine has some heat in it. But this tapping carrys...

Afternoon all, Would anybody have a picture or know off the top of their head which way the tab goes on the nut for tightening up the adjuster bolt (the one that goes through the pump and the adjuster bracket) on the power steering pump. I took the pump off about two years ago and I've...

Wanted: As the title says. I am looking for the top section of the cambelt cover if anyone has one? Either a clear one or standard as mine has gone brittle and broken Thanks

As the title says. I am looking for both parts. Pictures of fmic fitted would be good as I am have clearance issues with the one I have fitted at the moment.

After a speedvision actuator if anyone has one knocking about or somethnig similar. Cheers James

Firstly sorry if this is in the wrong section of the forum I was just wondering what people tend to do with their old CT9 Turbo's when replacing them. I will be fitting a hybrid turbo shortly and have the old turbo off! It has the usual problems with the CT9's but seems a shame to just scrap...

As above title can anyone help with the following parts at all please?

Afternoon guys, can anyone shed some light on where I can get hold of a trd clutch disc? I got the box and clutch etc off to replace the crank seal. And noticed there are some cracks where damper springs are in the disc. im a bit done really as the disc is no where near worn.

http://www.ebay.co.uk/itm/TOYOTA-STARLET-EP82-EP91-CT9-UPGRADE-TURBOCHARGER-TURBO-/400252970814?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d30efa73e&autorefresh=true I found this whilst searching around ebay. I know that my turbo has the normal crack. and wondered if anyone has got one of...

Just wondering if any of you guys have removed a gearbox while the car is on a two post lift. And wether or not you used anything to hold the engine up? Or will the left hand engine mount hold the engine well enough on its own?

Evening guys. Just looking for some advise on the oil filter relocation kits. I bought years and years ago a relocation kit. But once I got round to fitting it I found that the FMIC inter cooler pipe goes right in front of where the inlet and outlet pipes go onto the plate which screws to...

Evening all, Im an old forum user returning once again. I don't think I have posted on here for a few years. But after getting the old starlet moved to a new garage and able to work on it again I'm back trying to refresh my memory and get the bug back. Im James 25 from Lancaster...

As the title says, Im looking for a good working interior light to fit an EP82 GT Im dragging the old girl out from the corner of my lock up and thats the first item I can remember needing to replace! Any help would be great guys

my god. How many glanza's are there out here. Me and my lass have seen loads so far and we have been here since saturday. And one gt. Theres a nice red one that ive seen a couple of times that a lass drives around protaras. cyprus is a lovely place though and yes i am sunburnt already!

hi guys has anyone ever come across this situation of there being 23 splines in the hub and 31 splines on the drive shaft end? If so where on earth did you get your CV joints from? Cheers James

Hi guys and girls! as the title says! Im after a pair of wind deflectors to fit my EP82 if anyone has a set going spare at all! Please PM if anyone can help at all!

Now I have searched the forums regarding this problem, and I have come up with the conclusion that this can be caused through turbo seals or fuelling. now Im persuming after fitting my FPR and setting it to 4.0 bar that this could be causing the white smoke from the exhaust, But when the engine...

Does anyone have any idea's wether or not the tensioning bracket for the EP82 is a bog standard fitment for the entire starlet range, even if it isnt turbocharged? any help would be great as mine has managed to snap!

Hi guys, Just wondering if anyone has any hints/tips towards a problem with my HKS turbo timer! Its decided all of a sudden that it will stay at 0.00seconds, and will not move up or down at all. also once the engine is switched on, I can turn it the key to off, yet the engine will still...

Hi guys ***Edit Sorry this is a Speedvision FPR! NOT PURCHASED FROM SPS*** Has anyone ever fitted one of these? its a FPR that I bought from Speedvision, but im having difficulty fitting it! Does anyone have any pictures of one fitted to there car, or any technical advise at all...