Search results

hi a buddy of mine is having boost problems with his ep82. car boosts to .6 bar up to 4500-5000 rpm and after this the boost drops off down to near .2bar. I have checked intercooler piping and it all is in good condition. I disconnected the vac line off the actuator and it was still the...

right. back axle in my starlet gt has started to wobble. so i went under the car and found out my adjustable panhard rod was not tight. well the bolts were but where it was bolted on it seems the rose joint is too big for the bolt. the bilt can also shift so it seems as if the bolt is too...

thinking of getting these off ebay. would be a nice upgrade to the standard manifold. i know the stainless cracks more easily than the mild steel. the car is usually driven casually and not ragged, mostly boosting at .5...

ok i went to look at a glanza today. to start off heres what is wrong with it. the turbo doesnt boost properly and the car shoots blue and black smoke under hard accelleration. on low turbo there is only one boost light working. at high turbo there is no difference but the hi turbo light on...

im going looking at a glanza tomorrow. the guy said it has an lsd box in it. i know if its a factory fitted lsd it will say ct12b on the vin plate. if its aftermarket how will i know if its an lsd or not thanks eoin

right im going to look at one of the lads gts. the engine components are all perfect BUT the block is cracked. ive a 1.3 16v efi engine and want to know are the blocks the same. as far as i know they are but just in case someone knows for deffo

found this today. shows an engine getting put together. quite cool http://www.jonathansblog.net/deutz_engine_screensaver_animation

im purchacing a set of kyb shocks front and rear. im also going to buy tien springs. the only 60mm springs are for the ep91. i thought they were the same shocks and springs????

ive a friend who has a gt. the car is completely standard bar the turbo which is "stage two and running at 1.1 bar boost" i keep trying to tell him that the standard manifold wont take the 1.1 bar and that his engine will go. what do ye think. am i right or wrong

one of the lads fitted a heater matrix the other day. indicators and hazards wernt wotking when we got it done. stripped down the car and found a relay wasnt plugged in. now the hazards work but indicators mounted on wheel wont. any clue why??? how many connections are there. ive got the...

im going putting a gt turbo engine into my starlet. becides the engine box and back axle would i need anything else to do the job. help apprieciated

how are things. im eoin from cork. i dont have a gt yet just a regular starlet. mad into the gts and cams or anything toyota. thats it really