adapters for different injectors...

Discussion in 'Chill Out Room' started by turboloon, Apr 26, 2012.

  1. turboloon

    turboloon Registered User +

  2. pc18

    pc18 North West England Area Rep.

    check they clip into the injector plugs well and wont come out easily.

    i had some adapters for mine but they didnt fit well so the plugs were changed for the injectors instead of using the adapters.
     
  3. turboloon

    turboloon Registered User +

    i have the square plugs for the injectors as well...but hopefully these will be a good fit who did you get your adapters from?
     
  4. HYBRID

    HYBRID Super Moderator <a href="http://www.toyotagtturbo.

    u can either find the square bosch style clips from ebay... or if u like i can get them for you.

    kon
     
  5. turboloon

    turboloon Registered User +

    thanks for the offer Kon, but i have the ev1 square fittings already,but this adapters is just to stop me from chopping plugs off...;)
     
  6. GTwayne

    GTwayne Paid Member

  7. weeJohn

    weeJohn Paid Member

    Nice find but I just cut the Toyota plugs off and soldered the square plugs on. There is not a lot of room there for another set of plugs and sockets.
     
  8. turboloon

    turboloon Registered User +

    well i was gonna do that as well john,but i need to drive the car to the mappers(which is at least 1.5 hrs away),so really not ideal for me to be running bigger injectors for that sort of distance unmapped..:(
     
  9. weeJohn

    weeJohn Paid Member

    Good point, they are great for that then!
     
  10. turboloon

    turboloon Registered User +

    can't wait to get it mapped though;)
     

Share This Page