advice on results

[h3ppy]

well had my car on the rollin road last weekend.

the car is running a cat back exhaust(not sure of the make) and a hks mushroom filter. it made 139.1 bhp at the flywheel, and 126 torque. it was boostin at 11psi on the rollers.

is that normal? alot of people have alot more torque?? any opinions guys and girls??

 

[starbogt]

mine has more mods and more boost and only made 132bhp at the flywheel and 152lbft @ 3000rpm can you get a list of your mods up ??

mine was with a cracked mani too

 

[jamesgtturbo]

doesnt seem much wrong there mate

 

[h3ppy]

the mods are as i said, just the cat back exhaust and the the hks mushroom filter. i thought the torque was a bit down??

 

[starbogt]

not really low as standard they're around 110 I believe so with the mods it looks good. Get a decat and manifold and you'll notice a difference in torque I recon.

 

[herbie]

who's rollers did you go on?

I made 149 bhp / 155 lbft with decat, 2.5" system and HKS filter, standard boost @ Japerformance.

Wallace Performance rollers usually give you an extra 10 bhp over the JP rollers

 

[starbogt]

see scooby-modders has a decat it maybe the freeflow that allows for the more torque.

 

[h3ppy]

it was at japerformance mate.

decat will be next mod, but i am hittin fuel cut with just the exhaust and filter so will have 2 sort somethin out!!

 

[aiki_joker]

who's rollers did you go on?

I made 149 bhp / 155 lbft with decat, 2.5" system and HKS filter, standard boost @ Japerformance.

Wallace Performance rollers usually give you an extra 10 bhp over the JP rollers

What makes you say this? Have you had experience?, can you back this up? The mechanics Iuse always uses Wallace, they know the guys I think. This is interesting to me because he says that Wallace is a good bet for a re-map (if the guy he knows is around). He says JapPerformance sucks???!

Surely all of the rolling roads should be calibrated the same? They should have calibration certificates?- Any comments appreciated

 

[herbie]

Yeah I ve used both rollers more than once. The Dastek roller were always 10 bhp more than Dyno dynamics roller. I do have graphs but cant be assed posting them


Wallace good for a remap?? You must be joking mate

This is what wallace performance did to my Subaru....