Conrod bearings

[Naldo250]

Hi guys just wanted to know if y’all know where I could find some mark 2 conrod bearings

code 13041 10020 02

 

[SKINY]

id works will have them and they ship worldwide

 

[Naldo250]

id works will have them and they ship worldwide

Thanks bro let me check that out

 

[Naldo250]

id works will have them and they ship worldwide

Not see them could you send a link if possible

 

[gorganl2000]

Not see them could you send a link if possible

drop him a PM on the website

 

[SKINY]

idworks.co.uk

 

[gorganl2000]

https://partsouq.com/en/search/all?q=13041+10020+02

i've use this website many times in the past

 

[Calum122]

Worth mentioning too, I believe Toyota just use repackaged TAIHO bearings.

https://japserviceparts.co.uk/produ...ng-set-starlet-gt-turbo-ep82-ep91-4e-fte-std/

Toyota are not in the business of making bearings, they make cars, and I'm led to believe TAIHO are the company they used for the shells.

 

[Naldo250]

https://partsouq.com/en/search/all?q=13041+10020+02

i've use this website many times in the past

is this for the 4efte ..... when i search the original code im getting different part numbers for the mark 2 bearing

 

[Naldo250]

Worth mentioning too, I believe Toyota just use repackaged TAIHO bearings.

https://japserviceparts.co.uk/produ...ng-set-starlet-gt-turbo-ep82-ep91-4e-fte-std/

Toyota are not in the business of making bearings, they make cars, and I'm led to believe TAIHO are the company they used for the shells.

oh ok ... is there any specific bearing code to type ? im not trying to get standard bearings because they cause me engine to have a slight knock at around 3-4000 rpms

 

[Naldo250]

another quick question guys ? is the 5E and 4E conrod bearings the same ?

 

[gorganl2000]

another quick question guys ? is the 5E and 4E conrod bearings the same ?

no

 

[gorganl2000]

is this for the 4efte ..... when i search the original code im getting different part numbers for the mark 2 bearing

i used the code you provided in your original post

use www.toyodiy.com and insert your chassis number and find the correct part numbers for your car

 

[gorganl2000]

oh ok ... is there any specific bearing code to type ? im not trying to get standard bearings because they cause me engine to have a slight knock at around 3-4000 rpms

is your crankshaft damaged? does it need to be inspected/checked by a machine shop? will you need undersized bearings?

 

[Naldo250]

is your crankshaft damaged? does it need to be inspected/checked by a machine shop? will you need undersized bearings?

No it’s not damaged I’m just doing a complete rebuild and just want to install the correct bearings