Ecu Ireland

[darckskullz]

Hi
I'm looking to get a Uprated ecu and a uprated fuel pump and get it put it into my car and mapped and dynoed. Question is where is there in Ireland or Northern Ireland to get this done closer to Sligo the better ???
And who's gone where and recommends where and what hard ware ??
Thanks in advance for any info.

 

[Breno58]

Try get a GReddy Emanage blue, theres a lad in glaway that will fit and map it for 350

Camskill sell walbro uprated fuel pumps

 

[starletburkie]

tuning developments sell a good 255 fuel pump the same as walbro! i run one and way cheaper than a walbro! whats your full engine spec and what boost ya plan on runnin? waste of time gettin a ecu mapped for a stock car and boost imo! that lad in galway mapped my car and chris carson on here does it aswell, big companys like tuning developments in ireland are just a rob

 

[Chris@CCM]

Emanage ultimate would be good man

 

[darckskullz]

On the engine I have hybrid turbo stainless mani and cat back, adjustable actuator, front mounted filter, magnacore leads, standard cat atm but have decat there. Ive a blitz sbc dual. and theres a fcd in it atm. and a cusco can. And a front mount. I don't know what boost I wanna run I jst want more power ha and have it safe. Will eventually go tdo4/5 and a forged block but not yet. So I want a ecu that will do all. So what you reckon.

 

[starletburkie]

get a decat in anyways! what boost does it run now? with the fcd you could use a fuel pressure regulator and get them set up for a 1.0 bar boost or get a piggyback ecu like emanage ultimate and get it mapped. 1.0 bar will be safe if set up right

 

[darckskullz]

Ive only really drove hard once since putting the hybrid and that on. Was waitin till I got it nctd before I put the decat on. It running .8 atm.
I knew of that but for the long run I reckon a ecu.

 

[starletburkie]

emu goes for around 400 - 500 pounds in the uk, make sure the fcd is set to 0 or it could do damage to the engine

 

[darckskullz]

emu goes for around 400 - 500 pounds in the uk, make sure the fcd is set to 0 or it could do damage to the engine

Thanks what else will I need?? Map sensor harness??
Yup its at zero couldn't have that now could we

 

[starletburkie]

harness and 3 bar map sensor! i got a 3 bar map sensor from tuning developments that plugs straight into the emanage, ya might get all them secondhand tho

 

[darckskullz]

harness and 3 bar map sensor! i got a 3 bar map sensor from tuning developments that plugs straight into the emanage, ya might get all them secondhand tho

Thanks again man thats wrapped everything up for me so guess ill be gettin a emu