Hi All, appreciate if someone can give a hint on what other things I need to check in-order for an EMU to work on a 4efte engine having MSD Blaster SS. Its been 2 nights that have no luck. It seems that the IGT is dead while IGT In(Pin5)-Out(Pin12) goes in and out on EMU.
Bypassing this Pin(ECU Pin6 ECU to IGT) will give an engine a good ignition start
Jumper7 is set to normal and Jumper8 set to 5v.
(EMU version C)
Thanks and more power
Flipp3r
Bypassing this Pin(ECU Pin6 ECU to IGT) will give an engine a good ignition start
Jumper7 is set to normal and Jumper8 set to 5v.
(EMU version C)
Thanks and more power
Flipp3r
Last edited: