Glanza lower wishbone bushs????

A

abbott

Member +
this is for my brother as he needs to replace front and rear lower wishbone bushs what i need to know is
they do different sizes for both

rear bush they offer 35mm long mount bracket or 50mm long mount bracket

http://www.priracing.com/product.php/2613/...r-50mm-bracket-

http://www.priracing.com/product.php/2614/...r-35mm-bracket-

front bush they offer 34mm OD or 31mm OD

What size is correct?

The Glanza is 96 to 97 on a P reg

he ordered the front ones from sumo and they said its 34mm required but im not 100%

any info would be a great help
 
Texx

Texx

Super Moderator
Pretty sure the front bush is 31mm for the EP91, the 34mm is for EP82.

The rear bush for a 96/97 should be the 50mm, it's best to check the clamp. If the clamp looks the same as an EP82 then it's the 50mm, if the clamp is a lot longer and has 4 bolts it's the 35mm.
 
A

abbott

Member +
Texx said:
Pretty sure the front bush is 31mm for the EP91, the 34mm is for EP82.

The rear bush for a 96/97 should be the 50mm, it's best to check the clamp. If the clamp looks the same as an EP82 then it's the 50mm, if the clamp is a lot longer and has 4 bolts it's the 35mm.
Click to expand...

my brothers has a 2 bolt bracket
 
A

abbott

Member +
Texx said:
Should be the 50mm you need then mate.
Click to expand...


ok i will go for that then. with the front bushs is that 31mm inner diameter or o/ diameter? just as my brother got told when ordering it glanza is 34mm and ive measured the ones on his arms and it measures 34mm 0/diameter
 
Texx

Texx

Super Moderator
I would have thought the measurements given are for the diameter of the bush body i.e. the part that goes through the arm.
 
Gryzor

Gryzor

Admin
phpThumb.php

[A] Outside Diameter 31
Inside Diameter 18.5
[C] Body Length 18.5
[D] Flange Length 6.5
[E] Flange OD 37
[F] Overall Length

img.php

http://www.superpro.com.au/superpro-parts?id=SPF1905K
 
danb87

danb87

South East England Area Rep
guys any pics of the bits i need too check on myn too see if myn are deffo ep82 wishbones? just so i get the right sizes :)

an by pics i mean the bits where you say the 35 mm has 4 bolts an 50mm 2.

thanks
 
Texx

Texx

Super Moderator
The 2 bolt 50mm is the small bracket, the 4 bolt 35mm is the big fuck'off long bracket.

ep91lowerarm.png
 
danb87

danb87

South East England Area Rep
So myn being ep82 should have 34mm an 50mm no chance of itbhavin anythink of the ep91
 
Rory

Rory

Lifer
Poke your head under the car and have a look! :haha: You will be able to see them no problem :)
 
You must log in or register to reply here.
Top