Texx
Super Moderator
Original Article Credit: fraser dalgarno
This is a guide as to how I fitted my HKS 30th aniversary turbo timer.
1st step was open up the area under the steering wheel
this is what you will find
2nd step is seperate the plugs shown in this image
like so
3rd step plug the tt7 harness into the removed plug,like so
4th step is simply plug the other part of the tt7 harness into the 1st removed slot,like so
u will end up with this
5th step,earth the earth cable in the kit,i also put the handbrake wire on here too by baring the wire and attatching to the other earth one
like so
6th step is now simply stick down the main body of the turbo timer to wherever you feel is best(i stuck it to the top of the pipe for the air flow i think it is,beside the plugs
7th step is locate your display unit and stick it down(i put it just above my cupholders where the cigarette ashtray used to be)
hope this can help some people as i was totally confused before i did this and with advise from guys on here i managed
This is a guide as to how I fitted my HKS 30th aniversary turbo timer.
1st step was open up the area under the steering wheel
this is what you will find
2nd step is seperate the plugs shown in this image
like so
3rd step plug the tt7 harness into the removed plug,like so
4th step is simply plug the other part of the tt7 harness into the 1st removed slot,like so
u will end up with this
5th step,earth the earth cable in the kit,i also put the handbrake wire on here too by baring the wire and attatching to the other earth one
like so
6th step is now simply stick down the main body of the turbo timer to wherever you feel is best(i stuck it to the top of the pipe for the air flow i think it is,beside the plugs
7th step is locate your display unit and stick it down(i put it just above my cupholders where the cigarette ashtray used to be)
hope this can help some people as i was totally confused before i did this and with advise from guys on here i managed