New Product's Available From Tuning Development's

N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
Hello Everyone

Thanks alot for browsing our section, we are adding this thread to post up the latest products we have just launched for the Starlet Turbo world, all products are fantastic quality, which have been well tested and along with this at fantastic prices!

We are proud to annouce that we are able to supply all BC Racing Product's to you guys at great prices, we hold the BC Racing Coilover Kit's instock ready for posting, these kits are brand new, complete with everything needed to fit.

BC Racing Coilover Kit's for EP82/EP91

Ride Height Adjustment
Pre Load Adjustment
30 Levels of Damping Force Adjustment
Pillow Ball Top Mounts
Front Camber Plates Adjustable
Spring rates F6 Rear 4
Huge 46mm Piston Diameter
Fantastic Black and Gold Anodised Finish
Full Direct Replacement for Standard with Brake Line Brackets
12 Months Warranty

Our BR model is perfect for street and occasional road course duty. With easily accessible knobs for fine tuning your compression/rebound and seperately adjustable ride height, having a performance coilover system couldnt be any easier. You choose how low or high you want your vehicle, no preset ride height here, and our patented concave lower locking ring keeps it locked in. All our systems come with pillowball mounts to provide the most feedback possible from your suspension and to sharpen your steering response. BC's available front and rear camber plates also allow you to get the perfect alignment setup without compromise. All this while providing a strong, attractive looking coilover system.

PICT2231.jpg


PICT2234.jpg


PICT2235.jpg


BC Racing Full Coilover Kit System for EP82/EP91 - £610 Delivered + 4% Paypal Fee's
In Stock

--------------------------------------------------------------------------
PolyBush Engine Mount Set's for EP82/EP91

We also are now offering Polybush Engine Mount's for all EP82/EP91 (with non factory lsd), we sell these engine mounts seperate or at a discounted price as a set.

These polybush engine mounts are a great replacement for the old worn out stock engine mounts and also allow for a much stronger mount when compared to the uprated TRD rubber engine mounts, these offer better performance and will outlast the rubber engine mounts by far and all this at a fraction of the price of the other uprated mounts out there!

Each Kit Includes:

Right Hand Side Engine Mount
Left Hand Side Engine/Gearbox Mount
Rear Gearbox Mount

For fitment you will require to take the old mount off the vehicle and cut the old rubber out of the mount and then fit the new polybush to the housing and refit to the vehicle, not a massive job to do but can take alittle bit of time but the end result is well worth it!

PICT2237.jpg


PICT2238.jpg


PolyBush Engine Mount Set's for EP82/EP91 (non factory LSD) - £110 Delivered + 4% Paypal Fee's
In Stock

Engine Mount's Available Seperate at £45 Delivered Each + 4% Paypal Fee's

Many Thanks for viewing and if you would like to place a order please either PM us or email us at:

Enquiry@TuningDevelopments.co.uk

Please also look out in the future as we have many more new parts launching very soon.

~Nick @ Tuning Developments
www.TuningDevelopments.co.uk
 
Last edited:
gv1.3

gv1.3

Admin
nice additions Nick.

Id change the wording on the poly bushes because when I took mine off the old rubber had to be burned and then the inner ring had to be hammered out it took ages just to get one ready for the new bush... another member told me they had the same experience too so there is a bit more to it than pushing one out and pushing the other in :)
 
KrissyB

KrissyB

Member +
Maybe a Group buy would be as great idea i for one am after a set of these what bushes do i need if an LSD is fitted though Nick​
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
Gee said:
The BC are at a good price.
Click to expand...
Thanks, the quality looks fantastic on them, seem alot better than similar priced coilover kits :)

KrissyB said:
Maybe a Group buy would be as great idea i for one am after a set of these what bushes do i need if an LSD is fitted though Nick​
Click to expand...
I can put a group buy together for them if enough interest is there :)

gv1.3 said:
nice additions Nick.

Id change the wording on the poly bushes because when I took mine off the old rubber had to be burned and then the inner ring had to be hammered out it took ages just to get one ready for the new bush... another member told me they had the same experience too so there is a bit more to it than pushing one out and pushing the other in :)
Click to expand...
Thanks Dylan and i will reword it as input from customers is most important, fitting them isnt a massively problem though but thanks alot for the response guys, will have more products available soon!

~Nick @ Tuning Developments
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
Forgot to add the BC Racing Coilovers have the Genuine front Brake Hose brackets on them for a totally bolt on fitment with no modification needed!

Along with this they have Softer Spring Rates compared to the D2's and other brands of coilovers out there giving a better ride for road use yet giving a solid feel on the track.

Many Thanks
~Nick @ Tuning Developments
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
weakboy2 said:
Nick, will there be a choice of different spring rates?

Also can we start up a GB on the poly engine bushes? :D
Click to expand...
Hey Mate

Regarding different spring rates, we don't offer this with the BC Racing Coilovers but what spring rates are you after mate? The BC Racing Coilovers should be better suited for more road use than other makes of coilovers out there but they will still give a firm ride for track use.

As for the PolyEngine Mounts we certainly can do a group buy mate if theres 5+ Names we can get one started.

Many Thanks
~Nick @ Tuning Developments
 
W

weakboy2

Member +
well well i finally get round to investing in some i would probably be after more like 8 - 6 or maybe a bit stiffer, as my car is evolving into a proper track car, wont be used much really once its all done, just for track days so i could endure a harsher ride!
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
weakboy2 said:
well well i finally get round to investing in some i would probably be after more like 8 - 6 or maybe a bit stiffer, as my car is evolving into a proper track car, wont be used much really once its all done, just for track days so i could endure a harsher ride!
Click to expand...
Hey Mate

Well we have another brand of coilover thats in the testing stages which have these spring rates you have said, we can even go further and get a more track spec coilover for you once we are happy with them.

Drop me a PM and we can talk further

Many Thanks and let me know if you would like the GB on the Engine Mounts setting up?

~Nick @ Tuning Developments
 
You must log in or register to reply here.
Top