NEW: WEPR TD04 Hybrid turbo kit with new manifold!!

Discussion in 'New Parts' started by wickedep, Sep 12, 2009.

  1. string gt

    string gt Registered User +

    so do you get a wastegate with the kits or not? like if i buy mani with external wastegate, fitting lines plus downpipe n turbo. i'll be able to run this setup as i hav fmic already.
  2. string gt

    string gt Registered User +

    anyone bought just mani wit ext wg, downpipe, turbo n lines. That all is needed to fit? Other things on list are to do with fmic right? Wanna order tip asap. Cheers
  3. wickedep

    wickedep Registered Trader

    if you already have a fmic kit then the prices for the full turbo kits will be..

    td04 turbo kit with external w.gate set up--$2400usd shipped
    td04 turbo kit with internal w.gate set up -- $2050usd shipped

    if you want to buy the parts can price them up as per the individual prices i have give on the original post in this thread. we do not sell the tial wastegate separately..only included if you buy a full kit. thanks

    wickedEP Racing
  4. wickedep

    wickedep Registered Trader

    other than the fmic kit..the other parts you will need are..

    oil lines/water fittings
    intake pipe
    Tial 38mm wastegate (if youre going with an external w.gate set up)
    screamer pipe for the tial (if youre going with an external w.gate set up)

    thats about it!! buying the full kit minus the fmic is cheaper than paying the individual price for each required component.

    wickedEP Racing
  5. clarkytrd

    clarkytrd Paid Member

    can you give me a price on

    A Kit Excluding Turbo
    A Kit Excluding Turbo and FMIC

    Thanks Sacha,
  6. clarkytrd

    clarkytrd Paid Member

    Have you any results with the new external wastegate setup??

    Would you have anymore pictures of it mate, need to have a look at it from unnderneath to see where the screamer comes down.

    Thank You
  7. wickedep

    wickedep Registered Trader

    A Kit Excluding Turbo

    Td04 Evolution manifold m/s -- USD $450 Shipped
    Td04 Evoltuion manifold m/s with ext.gate option-- USD $475 Shipped
    Td04 Evolution manifold 321 s/s-- USD $600 Shipped
    Td04 Evolution manifold 321 s/s with ext.gate option-- USD $625 Shipped
    TD04 downpipe to suit-- USD $275 Shipped
    Td04 fmic kit to suit-- USD $690 Shipped (deduct if not needed)
    Td04 fmic piping kit only-- USD $290 Shipped
    Td04 turbo to fmic pipe only-- USD $150 Shipped
    Cold air intake pipe-- USD $105 Shipped
    Oil feed/oil return/banjo bolt/washers/water feed nipples-- USD $150 Shipped


    wickedEP Racing
  8. wickedep

    wickedep Registered Trader

    i will look and see if i have more pics for ya mate..not sure if i have any more on where the dump comes down. if you look at the third pic on page two..that shows you clearly where it comes out and down from. thanks

    wickedEP Racing
  9. clarkytrd

    clarkytrd Paid Member

    Hey Sacha,

    If I buy the following, can you supply me with an external wastegate and screamer pipe or?!

    - Mild Steel External Wastegate Manifold
    - Downpipe
    - Oil Feed, Oil Return, Banjo Bolt, Water Feed Nipples.


  10. wickedep

    wickedep Registered Trader

    honestly..the reason we do not sell the tial's on their own is that because we have to import them and then ship them out to you again..the end cost is pretty high because of this. if someone buys a full turbo kit then we have room to absorb this cost without passing it onto the we are able to provide the tial with the full kit. if we were to send you the wastegate separately like in your case..i would have to charge you around $425usd shipped for it just to break even...pretty expensive considering you can probably find it locally for much less....

    just trying my best to save you guys some cash :beer:

    the prices you requested are:

    - Mild Steel External Wastegate Manifold --$475usd shipped
    - Downpipe -- $275usd shipped
    - Oil Feed, Oil Return, Banjo Bolt, Water Feed Nipples --$150usd shipped
    - Gaskets -- free if you're buying all the above (can extend this deal to anyone else interested in getting the above parts too)


    wickedEP Racing
  11. ep91steve

    ep91steve Registered User +

    td04 turbo to fmic pipe will that fit a blitz fmic
  12. wickedep

    wickedep Registered Trader

    it will, but you need to modify it very little. it will fit any universal style cooler with a little modification. thanks

    wickedEP Racing
  13. somal

    somal Paid Member

    a kit like that makes u wanna have a transparent bonnet for that glow to show...
  14. dan88

    dan88 Paid Member

    Hi mate,

    I am looking to purchase a manifold and dump pipe in stainless or m/s and was wondering if this can be modified before shipping to suit the 10mm longer block?

    If so, please advise of any possible costs. Also, would there be any discount if two sets were purchased (as I may have a mate that's interested)?

    I was in Sri Lanka recently, but unfortunately I only visited Galle, Negombo, Columbo and a few other places... Would've loved to have checked out your workshop!

  15. wickedep

    wickedep Registered Trader

    hey dan,
    no way...we are located in colombo mate! maybe next time!

    by longer block do you mean 5e? if so..there's no extra charge..we are running a special on our manifold/downpipe combos at the moment..check the link below..!!!!

    also we are days from releasing a new ram style manifold/ keep an eye out for that. if you need any specific quotes just PM me.

    wickedEP Racing
  16. rosso321

    rosso321 Registered User +

    well stupid question i think whats the red shiny part??
  17. jonny-boi32

    jonny-boi32 Paid Member

    tial external wastegate
  18. wickedep

    wickedep Registered Trader

    hey guys..
    just and update..we've changed the location of the wastegate yet again. the wastegate sits down near the gear box now..just like it does with our ram style manifold. i will update with new pics shortly...just really busy at the moment. in our pursuit to continually improve our products..changes were made to make an awesome product even better! will put up some visuals shortly..

    wickedEP Racing
  19. ollie454

    ollie454 Registered User +

    do you still do this kit mate? if so would you do it with a td05 turbo instead? pm if you like
  20. wickedep

    wickedep Registered Trader

    yes mate, we still do this kit and thats exactly how we will be selling the can choose between the evolution/ram style manifold....td04 or td5 16g. thanks!

    wickedEP Racing

Share This Page