remove actuator help

[O_D_O_H_E_R_T_Y]

how do i take out my hks actuator??

 

[TURBO2010]

hhhhmm hey mate theres a post ere how to install 1 so id just do everything in reverse!! ill try and get it for ya!!

 

[TurboDave]

Circlip off the end of the actuator arm, 2 bolts on the other end of the actuator. Not a hard job but not much room to get a spanner on the bolts with the EFI pipe on and rad in.

 

[O_D_O_H_E_R_T_Y]

right tanx, do i have to take of the efi pipe?

 

[TurboDave]

right tanx, do i have to take of the efi pipe?

You will be able to get it off with it in place but there isnt much room.

 

[O_D_O_H_E_R_T_Y]

Circlip off the end of the actuator arm, 2 bolts on the other end of the actuator. Not a hard job but not much room to get a spanner on the bolts with the EFI pipe on and rad in.

i have that done but i cant pull out the actuator out??

 

[TurboDave]

Have you taken the circlip off the end of the arm, do you mean that there physically isnt enough room to drop the actuator down or bring it out the top or is it stuck/connected to something?

 

[O_D_O_H_E_R_T_Y]

Have you taken the circlip off the end of the arm, do you mean that there physically isnt enough room to drop the actuator down or bring it out the top or is it stuck/connected to something?

ya iv all disconnected, but yes theres not enough room to bring iy out, its loose not connevted to anything

 

[TURBO2010]

mabe this might help!

http://www.toyotagtturbo.com/forums/showthread.php?t=82&hightlight=fitting+actuator

 

[Galen]

ya iv all disconnected, but yes theres not enough room to bring iy out, its loose not connevted to anything

Twist off the end that was connected to the wastegate

 

[O_D_O_H_E_R_T_Y]

i lost the circlip off the end of the actuator arm

anybody know where i could get one again??

 

[ep82lunacy]

When I lost mine I just used a thin piece of steel tieing wire. still going strong today