Subaru Rolling road result

[Dub-Se7en]

i've had it on the rollers today,

it's making 302bhp / 266lb.ft

no afr plot sadly as mikeanics rollers are rather old, also been told to get a fmic on it as it's heatsoaking quite badly, it's a later ecu that's been remapped, fuelling is quite rich with no det, which is good news.

less good news is the standard engine can't really cope, and a block test confirms boost is getting into the cooling system past the head gaskets. drive normally and all is well, give 'er some and she's not happy :homer:

think the answer is to reduce the boost to around 1 bar. or make a call to mr cosworth for some proper hg's

 

[gv1.3]

nice one man, love those scooby wagons.

 

[Dub-Se7en]

cheers mang, it's not bad for a work hack, so am not after mad power or spending thousands on mods will most likely turn the boost down for the sake of reliability

 

[GP82]

Whats wrong with the power graph readout, it says 145 hp, nevermind it's probs jus' me not getting it :homer:

Thats a healthy result even with those unhealthy headgaskets. I remember you getting the ct9 setup @ Mikeanics and making like 200 + hp there so oldschool equipment is cool, love the big analog dials in the back of the garage where the tuner gets his feedback. Good job!

 

[Dub-Se7en]

Whats wrong with the power graph readout, it says 145 hp, nevermind it's probs jus' me not getting it :homer:

Thats a healthy result even with those unhealthy headgaskets. I remember you getting the ct9 setup @ Mikeanics and making like 200 + hp there so oldschool equipment is cool, love the big analog dials in the back of the garage where the tuner gets his feedback. Good job!

the results are per axle

yeah it is old skool but seems fairly accurate as my starlet made 169 before the ported head @ 1bar on a ct9 which sounds about right.