Texx
Super Moderator
Original Article Credit: glanza_dan
This is how to adapt the HDI cooler piping when upgrading to a TD04 or similar turbo from the stock CT9 turbo and outlet pipe.
You will need
48mm-52mm silicon 90° elbow reducer
52mm hose joiner (approx 3" or 75mm long)
52mm silicon hose (approx 6.5" or 17cm, but can be cut down if too long as it's better to be on the safe side.)
This is how to adapt the HDI cooler piping when upgrading to a TD04 or similar turbo from the stock CT9 turbo and outlet pipe.
You will need
48mm-52mm silicon 90° elbow reducer
52mm hose joiner (approx 3" or 75mm long)
52mm silicon hose (approx 6.5" or 17cm, but can be cut down if too long as it's better to be on the safe side.)
Last edited: