K26/K24 Hybrid in for mapping Sat 1st March

[Dane_Bristol]

Hey All,

After one stressfull week spending ever min that i had trying to get the car ready she is finally ready, i was fearfull that i would not make it as i booked in the car to get mapped this saturday and as the days went on i got more worried.

Litterally 1 day to go, not seen anyone on the site do this before so will be very interesting to see what i can get on standard internals.

Just to run thought had my old K24 rebuilt, a K26 Compressor housing was placed in it and i have kept the K24 exhaust housing. Blades have ben cut back to help the top end a little too.

hoping for some nice results this time around but shall have to see how it goes.

Il update this hread once reslts are in which will be Saturday late afternoon, wish me luck lol.


Cheers
Dane

[dave-gtturbo]

Nice one mate should get a good result with it :D

No point in stressing about it mate, it'll all be fine i'm sure! Can't wait to see the figures (and graph? ;) )

Dave

[Dane_Bristol]

Nice one mate should get a good result with it :D

No point in stressing about it mate, it'll all be fine i'm sure! Can't wait to see the figures (and graph? ;) )

Dave

I was just stressing as i didnt think i would fit everything in time lol. Il post it all up on Saturday.

[Gee]

Should be a good one mate.

[Kelly]

good luck :)

[TurboDave]

The turbo will produce what ever you want to run on std internals Dane ;).

[Nwimie]

nice one bud cant wait to see the results with the hybrid :) good luck ill be waiting for you to ring with the results :p

[Dane_Bristol]

Will do bud :)

[gv1.3]

The turbo will produce what ever you want to run on std internals Dane ;).

or whatever you have the balls to run on it! hehe... hope it goes well man

[Dane_Bristol]

Got back from the rollers, sad to say but i am currently only runin 99.4 bhp, probably the lowest in the site lol. No boost for me.

Reason being is that the external wastegate decided to 'Retire' whilst on the rolling road, all was going well then suddenly all boost died off.

Turbo is fine but all it leads to the external wastegate, wouldnt suprise me though as the wastegate was probably on its way out. I have no option but replace it, but i suppose what have saved further delay is the fact that i have a spare external wastegate that i wil attempt to fit tomorrow.

Mid way through though he had it at around 221bhp aft so it looks promising but couldnt complete mapping as the gate decided to play up.

Looks like il be very busy tomorrow lol.

[HutchGlanzaV]

Thats a shitter Dane but atleast it was making some promising figures before the wastegate went tits and you have a replacement so it should be an easy fix.

Fingers crossed for next time mate.

[Chris@CCM]

thats crap mate but handy u had one siting anyways .

[Dane_Bristol]

I wish it was easy, i have to drop the whole turo kit tomorrow again and undo everything in order to get to 1 Bolt lol, going to take a while thats foresure.

[Dane_Bristol]

So ready for Round 2 lol going up there tomorrow hopefully it all holds out just fine then i can finally boost the car properly. Will post RR graphs when i get back if all goes well.

[Glanza-V]

wheres ur wastegate placed?

[Dane_Bristol]

wheres ur wastegate placed?

Faces downwards mate sits upside down pointing towards the floor, runs beside the downpipe. can take some pics if need be ?

[Chris@CCM]

good luck mate

[Glanza-V]

Faces downwards mate sits upside down pointing towards the floor, runs beside the downpipe. can take some pics if need be ?

if u dnt mind plz

[Dane_Bristol]

Results are in,

Done pretty well i though car pulls really really hard. Overall i am happy with it.
Here are the graphs:

222.9 ATF with around 217 FPT
http://i7.photobucket.com/albums/y274/dane16/IMG_1583.jpg

186.4 ATW and the AFR readings.
http://i7.photobucket.com/albums/y274/dane16/IMG_1584.jpg

A video that as made:

http://www.youtube.com/watch?v=3tmG0nkj6K8

[speedvision]

not bad..what boost was this done at dane?

sam

[Dane_Bristol]

not bad..what boost was this done at dane?

sam

Done at 1.1 bar buddy, as you can see it is ben mapped on the safe side so lots of potential there but as i still only have Standard internals its a realy safe map and Greg is a top man when it comes to these unbreakable maps.

[Chris@CCM]

mate well done ! defo more power in but as u say its a safe map :)

[Gee]

Will run that power all day long with a good tune mate, good going.

Boost comes on strong, nice mid range boost there. Does it spin up when it hits boost or just pulls a long?

[Dane_Bristol]

Will run that power all day long with a good tune mate, good going.

Boost comes on strong, nice mid range boost there. Does it spin up when it hits boost or just pulls a long?

Cheers Chris :),

Gee - Geat i mean the rain today did not help spinning in third and forth, i think in the dry though it will be very good, it pulls very very hard. Will be good to see how it does on a 1/4 mile il be at one some time this year.

[GTwayne]

Good result buddy. :)

[kingyglanza]

Good results buddy, just hope i get somthing similar when mines mapped in few weeks.
Top work!!!

[Dane_Bristol]

Cheers Guys, good luck with your results mate should be good :)

[TurboDave]

I bet its quick on the road Dane!

[GP82]

Very nice :cool:

Mid-range power must be ill, you got any boost spikes?

Damage has similar results on his K24 setup!

[Dane_Bristol]

Dave - Yeah it pulls very hard and just keeps going and going.

GP82 - No boost spiking mate my AVCR broke on the Rolling road so am now useing a fairly unknow Boost controller in this country called a Gizmo imported from New Zealand very very good piece of kit. They use exacly the same boost solinoids as the Apexi AVCR

[Johnny_C]

nice one lad.

[gorganl2000]

Dave - Yeah it pulls very hard and just keeps going and going.

GP82 - No boost spiking mate my AVCR broke on the Rolling road so am now useing a fairly unknow Boost controller in this country called a Gizmo imported from New Zealand very very good piece of kit. They use exacly the same boost solinoids as the Apexi AVCR


good result
and u can rest assured that gizzmo makes QUALITY products........and i'm not just saying that,,,as i'm not from NZ,,,but have used and seen some of their stuff:)

[Dane_Bristol]

good result
and u can rest assured that gizzmo makes QUALITY products........and i'm not just saying that,,,as i'm not from NZ,,,but have used and seen some of their stuff:)

Greta stuff i have got to be the only one that is acy#utally using these as it is not known here in Britan that well, or at least i can say i have never heard of them untill now.

[Dan3SGTE]

good figure dane, caint wait to see more boost

[Dane_Bristol]

good figure dane, caint wait to see more boost

Cheers buddy, will do eventually lol :)