Wanted: Pics of Whiteline Front Control Arm Brace

[tr0ublemaker03]

as above...need where you bolted them and where it clears the exhaust, tried fitting mine tonight with my anti lift kit and it doesn't seem to want to go

dide a search already, so any help would be appreciated :)

[tr0ublemaker03]

bump

[Red Hot]

It doesn't fit your car... The exhaust doesn't fit with the bar on...

[djurny]

hear hear gijs.. have the same problem.. :( and that with only a 2" exhaust!

[Red Hot]

Jep, it only fits the std. exhaust I think. You have to have exhaust work done...

[tr0ublemaker03]

right, I've got a custom 3 inch exhaust, I take it it won't fit then....

then it looks like it'll be a custom one made :)

cheers fella's

[Toby@ToyTuning.com]

As mentioned a lot depends on the exhaust design, the cusco units have slightly more clearance but they still touch with some systems. Way back when we had a Nur Spec on the car it touched the Cusco lower arm but the 5Zigen and Buddy Club C were fine, depends on system. With a three inch you will be hard pressed unless you go custom.

We now have a side exit so not an issue :) Don't forget Ultra also do a four pointer but that has even more issues with aftermarket exhaust systems. Any luck with your friend and the Zep Starlet Stephen?

Thanks,

Toby

[riko666]

right, I've got a custom 3 inch exhaust, I take it it won't fit then....

then it looks like it'll be a custom one made :)

cheers fella's

Doubt it - I'm still using my OEM Cynos exhaust, and there's about 1.25" between it and my JIC Lower Control Arm Brace?

[tr0ublemaker03]

As mentioned a lot depends on the exhaust design, the cusco units have slightly more clearance but they still touch with some systems. Way back when we had a Nur Spec on the car it touched the Cusco lower arm but the 5Zigen and Buddy Club C were fine, depends on system. With a three inch you will be hard pressed unless you go custom.

We now have a side exit so not an issue :) Don't forget Ultra also do a four pointer but that has even more issues with aftermarket exhaust systems. Any luck with your friend and the Zep Starlet Stephen?

Thanks,

Toby

cheers Tobs, think it;ll have to be a custom job then, thanks

you have pics of the ultra racing one?

about the Starlet, I told my buddy to shoot you a u2u by tommorow or else he'll lose out on it, so if he doesn't get to you, then it's his loss

[slow_gt]

You mean this?

http://i40.photobucket.com/albums/e210/slow_gt/Item%20for%20Sale/DSC00036.jpg

[sx_turbo]

yes toby mean that one.

[dave-gtturbo]

that looks awesome. :eek:

[sx_turbo]

that looks awesome. :eek:

yes it does, but my 5Zigen will never clear it.

[slow_gt]

Hmmnn... anyway Ultra Racing is fully custom made, They can custom with more clearance to clear the exhaust system.

[riko666]

well I should be fine - going to get a quotation for my exhaust system later and make sure it can clear my existing lower arm brace, so then I should be able to use the 4-point

[slow_gt]

Here's the picture for the rear.... :rockon:

http://i40.photobucket.com/albums/e210/slow_gt/Item%20for%20Sale/DSC00033.jpg

http://i40.photobucket.com/albums/e210/slow_gt/Item%20for%20Sale/DSC00034.jpg