emanage 5 yellow settings

[ramses974]

hi
i want to know if i use the 5 yellow settings of the AAV setup option and boost cut on the emanage can be possible for 1 bar on a td04

i have 255 walbro pump and 315cc injectors

[WallaceGlanza]

You need to get it set up using a wideband you can't just set it up by guesswork. You can adjust it using the yellow bits on the front but normally you leave them and set it up with a lap top using the software, yes it has a fuel cut option.

You also need to make sure the jumper settings inside are correct, are you getting a tuner to set it up?

[ramses974]

due to my location >REUNION island they are not japan tuners...for TOYOTA unlike euro tuners who have done someting for impreza or evolution
.
my car is very rare a PASEO with a 4EFTE swap ...no glanza in my island and only 5 paseo...
.
Yes i have an air fuel gauge >GREDDY linked to the greddy lambda sensor...

I have bought and HKS on ebay but it doesn t work..menwhile i have an e manage with all the complete harness and boost sensor... ihave the profec eO1 too

[WallaceGlanza]

Ok, so in that case you can use the e-01 to map the emanage and just keep an eye on the egt's, you can link the greddy gauge upto the e-01 too.

You only do basic adjustments to the emanage using the yellow dials, for proper tuning use the e-01.;)

These are the jumper and rotary switch settigs which you should check are correct too;

JP1: 1-2
JP2: 1-2
JP3: 1-2
JP4: OPEN
JP5: OPEN
JP6: OPEN
JP7: 1-2

Rotary Switch Settings:

Rotary Switch 1: 2
Rotary Switch 2: 4
Rotary Switch 3: 0

[ramses974]

i have already done this too...:):):)
but my problem is to set up the good value...
perhaps someone who has a TD04 can help me by giving me is map???:beer:

[WallaceGlanza]

It needs set specifically for your car bud, if somebody has a map you could use it as a base to work from but you'd still most likely need to adjust it a bit as all cars are different.

[ramses974]

It needs set specifically for your car bud, if somebody has a map you could use it as a base to work from but you'd still most likely need to adjust it a bit as all cars are different.

yes that is why i was thinking but i think nobody will give me a map...:freddy::rolleyes::rolleyes: