How to get lunch control to work on E-manage Ultimate. *

Status
Not open for further replies.
This is to put the lunch control thread together for the resolved area, this was achieved with the help of alot of people, thanks for everything.

Ok this will be a short couple of screenshots showing the settings needed to get this to work. All of the info is from the The Official EMU Tuning & prob thread!

To get this to work you need to set the 4EFTE ignition type as IGNITION SIGNAL instead of the usual RPM SIGNAL. shown below
launchpt2.jpg


Next step is to set the ignition cut settings. Go to the IGN tab:
set your start and cut rpm and put a tick beside start to retard ignition for the lunch.
finallaunchcontrolset.jpg
 
Last edited by a moderator:
Status
Not open for further replies.
Top