garrett M24 80A/R ??

EH@B

Member +
right now the car in the garge
custom new manifold
but i have closer pic
HKS217.jpg


and here is wht i got
HKS221.jpg
 

bimboy

Member +
a t28, some 25s look bigger than some 28s
you said it was from a pulsar if it came of a gtir it is a t28
 

Timmy

Member +
Judging by what i've seen on the net, an m24 is a garrett part code just for the compressor housing, they can be found on t04's aswell.
 

EH@B

Member +
i off the turbo and got perfect picz
i want knw
is this turbo ball bearing ???
08112008272.jpg


08112008259.jpg


08112008255.jpg


08112008256.jpg


08112008276.jpg


08112008265.jpg


see how is oil comming outside :(
no shaft play !

08112008249.jpg


08112008250.jpg


08112008248.jpg



this turbo is smoking
and found one to fix it if its thrust bearing
and i dont knw if its or ball bearing ?!!
 
Last edited:

EH@B

Member +
ya the lag isnt that bad as u said and it giving nice pushing
and i need to knw is it ball bearing or not ?? :(
 

ramses974

Member +
it is not a ball bearing turbo...
if you really want to push it correctly do a work ->ported and polished your head and a good cams with uprated vaves spring and if you are not affraid use the 5efhe high compression piston.. you will push it !!!
i have a turbo manifold for your turbo if you are interested ..:shoot:
 

EH@B

Member +
it is not a ball bearing turbo...
if you really want to push it correctly do a work ->ported and polished your head and a good cams with uprated vaves spring and if you are not affraid use the 5efhe high compression piston.. you will push it !!!
i have a turbo manifold for your turbo if you are interested ..:shoot:


mate i already using it now....... it its doing the job very well :rockon:

but i need to rebuild it because its smoking
thats all i was asking
i found one guy can rebuild it but he said i will do it if it non ball bearing turbo
but the bad luck :( its ball bearing
so he will try to do somthing:)
 
Last edited:

Sheldon

Malta Area Rep.
mate i already using it now....... it its doing the job very well :rockon:

but i need to rebuild it because its smoking
thats all i was asking
i found one guy can rebuild it but he said i will do it if it non ball bearing turbo
but the bad luck :( its ball bearing
so he will try to do somthing:)

he just told you that its not ball bearing!
 
Big compressor means it will draw in more volume of air per rotation however you need to know what size the turbine is? That will determine its spool characteristics. The turbine from what I can make of that top pic is smaller than the compressor side.
 
Top