garrett M24 80A/R ??

EH@B

Member +
garrett M24 A/R 80 ??

hii guyz
wht do u think about that turbo ????
i got one
but need information about it ???
 
Last edited:

HYBRID

Super Moderator <a href="http://www.toyotagtturbo.
0.80ar ??? good luck! lol.. most we go for is a super 60 or 70.. a 0.80ar intake is a little too laggy (were talking about 5500~5800rpms spoolup) on an untuned engine... so not very good..

then again got any pics... ? u never know lol
 

HYBRID

Super Moderator <a href="http://www.toyotagtturbo.
yeah i know, u know me & big turbos.. but man 0.80 ar on the front is a little doozy for a 4e.. id say its round the size of a t04e :D yum yum lol...

never heard of a m24 though... :confused:
 
bring the pics, don't call it lag, call it foreplay

the amount of foreplay he MAY have with this turbo.....there may not be room for anything else after.....:p:p:p...from the sounds of the a/r...seems like ALL foreplay to be honest, especially on the 4e on stock limiter.....would be sad to reach limiter and still be spooling...:p:p
 

EH@B

Member +
ok guyz i have picz
this turbo from sr20 engines
HKS219.jpg
 
Last edited:

HYBRID

Super Moderator <a href="http://www.toyotagtturbo.
that looks rather small to be a ar 0.80 hmmm... i have no idea.. but if its from an sr20det then i can assure u it wont last long over 12psi... they have ceramic shafts & love to blow the blades over 12psi..

kon
 

Timmy

Member +
i thought the only ceramic turbos on sr20detts were on the s15. And isn't a disco potatoe that one gt28rs.
 

bimboy

Member +
That is a small turbo, it is good for around 250hp and u can run around 15 psi on it. It is smaller than a t28 and should spool well. It is Way Way smaller than a td05, it around the same size as a td04l. My friend had on on his sentra for a long time very strong when well treated.

Correct me if I am wrong, but I though ar ratio is the relationship between the wheel and the housing and does not directly relate to the size of the turbo.
 
Last edited:

StarletRick

Fresh Recruit
hybrid, only the s15s had the ceramic shafts.

and they run high boost ok, a friend of mine had one spooling to 1.2bar and it was fine.
 

EH@B

Member +
guyz this as i said from sr20 ( pulsar )
and im not going over 0.7
and its good turbos for starlets
i saw many of them fitted to starlets here
 

HYBRID

Super Moderator <a href="http://www.toyotagtturbo.
what i dont get is why they call it an ar 0.80.. thats barely an ar 0.42 lol.. i was expecting to see something like a t04e ... not that litte shrimp lol..
 

dantheman

Member +
looks like a t25 off a early silvia, should have a .64 hot side.. would work pretty good on a 4e actually.
 
Top