Manual Gearbox Oil Change

Jay

Admin
Originally posted by banzai
Right first off if you've got stock LSD or aftermarket like i have you'll need some of this, about 3 bottles as they only hold 1ltr. The gearbox holds approx 2.5ltr

redline57904.jpg


The huge nut in this pic has to be removed to drain all the oil.

oil-1.jpg


Once it has completely drained put the nut back in and tighten up

DSC00157.jpg


Remove the big nut on the side of the box, This is used as a indication of when you have all your oil poured in. Once it starts to trickle out stop, you should have approx 2.5ltr of oil in the box then. Wait till it stops coming out the side then put the nut back on and tighten up.

DSC00155-1.jpg


This is where you pour the oil in, the arrow pointing to the nut on top. Remember to do on flat ground, after that you should be done.

This tutorial was done with the help of dac69er & Harvey

Well done lads!
 
Top