I mean one of the ihi twin scroll jobbies from imprezas.closest ive seen is a lad fitting 2 ct9s. each running off 2 cylinders each. I don't think it was very successful.
I mean one of the ihi twin scroll jobbies from imprezas.
sorry dac i had a feeling you knew what i ment as what you said is in theory the same idea.i know what you meant mate. just saying that is the closest i have seen done before.
thanks for that,dont know how i missed it.would like to hear more spec on the car.
@ dac69er
i actually think that it wil out perform a td04 at a bar ?? double the cfm , when build with 1and2 joining and 3and4 joining to keep spool up with a rev limit of 8k i can see this perform very well at a bar probly wont be boostin till 3500rpm ????
edit : theres the other option to to just leave all 4 feed the 1 ct9 and use the 1st ct9 exhaust gasses to spin the 2cnd 1 ???
how can you say it will out perform a td04 when you have to rev it to 8k to get the most from it?@ dac69er
i actually think that it wil out perform a td04 at a bar ?? double the cfm , when build with 1and2 joining and 3and4 joining to keep spool up with a rev limit of 8k i can see this perform very well at a bar probly wont be boostin till 3500rpm ????
edit : theres the other option to to just leave all 4 feed the 1 ct9 and use the 1st ct9 exhaust gasses to spin the 2cnd 1 ???
this is what im in the middle off atm im using ct9 to spool up a td04 just truing to make room to fit things so usage ct9 to 1bar then let the td04 o the rest but hopefully with no lag or very minimal
and when u feed 1 tru the other it will spool like stock to the limiter with the double cfm if u want then raise the limiter to take more advantage off it
mayby now u get what i mean ???
why wont it double phill ???? if the exhaust side from turbo 1 feeds nr2 exhaust intake then the 2 pipes from both compressors going to the front mount joined in 1 pipe i still see this as 2x cfm both ct9 will be producing there own cfm ???????
u wont have to rev to 8 k to get the max out of it dont twist my words ( no offence johny ) it would do at stock limit to but its an option
and when u feed 1 tru the other it will spool like stock to the limiter with the double cfm if u want then raise the limiter to take more advantage off it
mayby now u get what i mean ???