Recent content by Andy

Replied

If you do decide to split them I'll take both of the 60mm gauges :)

bump :drive:

bump :)

Wanted; Greddy 60mm Warning Series Oil Pressure gauge (in black.) Must be in good condition! Please PM me! Best Regards Andrew

Personally I would use exhaust paste, it works well and seals the system perfectly, just as long as the joint doesn't twist.

Wanted: Post 93 Front Standard Brake Disks Has anyone got a set of Post 93 Front Standard Brake Disks which they've removed and now have lying about, which we could borrow/have? Doesn't matter what condition the disks are in! Thanks Andrew

Hello First off, do you use your car on a daily basis? If you do I would personally look at the Excedy Organic setup, it will happily handle the power and will be a lot friendlier for day to day use. The Excedy clutch kits come complete with everything you need, however you will require a...

Akki we have Toy Tuning filters coming out, suitable for 260@ fly max and designed for the stock inlet track although we can supply adaptors for other occassions if needed. Very well priced as well half the cost of the HKS/Apexi/Blitz equivilents :) Andrew

He would know about it if he was hitting fuel cut ;) The standard TMIC should be fine at that boost, it will suffer heat soak but it shouldn't be enough to cause the car to lean out. What plugs are you running?

Valve stem seals usually create blue smoke if my memory serves me.

Hello Is the smoke definitely white yes? as that narrows the search. Is the smoke more apparent when you come on boost? In that case it's quite possible that the turbo oil seal has perished. To confirm this, remove the intake pipe and check for lateral play in the shaft. Also check for oil...

Which sensor are you talking about? The inlet air temp sensor is below (highlighted black) and wouldn't need to be removed when installing a FMIC??

Personally I think it's madness that you have to go through all that with a NEW manifold, skimming, bracing & cutting away the turbo and then there is still no gurantee it won't crack!? no matter how cheap I just can't personally understand it! Andrew

Hello, I will have a look for you tomorrow, we can supply a gearbox rebuild kit, but like Red Hot has said your best to get the box opened up and see what you need to replace. Thanks Andrew