Recent content by blueturd

i will check the line also. filter changed already,, the old one was clogged.

if problem still persist then i will have to check the fuel pressure regulator.

yeah i think it is..at times it will backfire when shift from first to second only. i already ordered a 255lph pump from tuning development waiting on it to see the result.

ok guys..i think i know now what the issue is...i think i have a low fuel pressure problem. on startup in the morning it will idle very low and turn off. have to start the car twice. i noticed last time i changed the fuel filter there was no pressure in the fuel line. now i ask someone to help...

90910-12048 Vacuum swicthing 88691-17030 vacuum solenoid

yeah the canister i have it installed,, see pic below,,i can see you do not have those,, so what is there on your throttle body where those hose connects to,, is it blocked.?

good info bro,, but i am talking about the one that is bolted on the firewall below the wiper motor,,that has vacuum hose connected to the throttle body,,,i think it plays a role for the AC system too. there's two valve a green connector and a black one.

hi guys found something that might be interested about this forum.... what i need to know is what is the role of the Ile up Valve and the vacuum switch above ignitor and coil..? mine seems to be not working as i turn the knob the car's idle does not change a bit...might this be the cause of the...

yeah i know,, but ive got a 4efte engine loom also,,only dash loom is NA,,the only wire that i cant figure out where it goes to from the dash loom is the T2 wire from the NA loom, T2 wire does not match any pin on the 4efte ecu..and the other pin is the low boost high boost (already cut the NA...

car does not shake when hard acceleration, but in the morning when hard acceleration at a small hill in second gear car looses power i have to press the gas pedal lightly. when I start in the morning it will idle at 300-500 like it is going to shut off, car goes back to idle normal soon as i...

I have seen this thread i will need to get a feeler gauge and set it right, cuz this is a Glanza V engine swap in an EP82. the guys may have swapped the TPS. each time i release the gas pedal the car will shake a bit engine mounts good.

Hi guys,, I think I'm having issues wit my TPS sensor being configured wrongly, the sensor is screwed on the throttle body far all the way to the left, there is no space in between the screws to the left, I have not diagnose it yet but I'm having symptoms related to it, car judders when gear...

Hi guys looking for a GT wiring Loom for engine and dashboard/or anyone who know how to convert the NA wiring loom to GT turbo.

Guys i need help with mine, did an engine swap 4efe to 4efte,, apparently the engine was tuned but it came with everything stock, stock ecu and wiring, engine swap went OK ran for a while ut when check timing it was way off 10 degrees, seems to be on 25degrees advance at idle,,.my mechanic set...

Hi im new, but im a starlet owner ep82, would like to know if i can fit a 430cc injector on the stock ecu..already have uprated fuel pump 255