Recent content by bony123

can someone help me with lowering springs.which ones are good.need stiff ones.not actually worried abt the comfort.should be stiff.for example for track use.cant afford coilovers.thnx

can someone tell me how do i fit a oil filter relocation kit.should the filter be fitted down words,i mean behind the radiator so that it has good pressure or at top of the engine.cant fit a sandwich kit on the stock filter area,so decided to get a relacator kit and fit a sandwich kit.car is...

got it :) .... thnx

well there is another pipe left open on the top,the nipple thats in the intake of the turbo that connects to the stocl solenoid,do i block that too.ive also seen some where,where the 2 actuator nozzels are connected to the mbc by a T at one side and the nozzle of the turbo on the other side of...

can some one help me connect a turbo smart boost controller.on the actuator side of my turbo it has 2 pipes,to which one do i connect the waste gate pipe that's noted on the manual boost controller.i simply took of the stock booste solenoid and connected the 2 pipes on 2 ports on the MBC,but not...

:S ..now i m really confused ....well i m on my way to the work shop again to fix it,lets see wht they do

well before this happened i took it to the work shop to clean my throttle body,after cleaning they said tps should be adjusted and my icv is not working because the tps as some kind of link to the icv,they connected the tps to a small machine and the display showed low/high dont wht was that...

just had this problem today,car is fully fine when i press the accelerator,but when i let go the accelerator and when its in second gear and also in 3rd gear the car jerks massively like hell.this only happens when i let go the throttle and when the rps comes near i guess 1500 to 2000 and when...

well wanted to know if 20psi is ok on idle at abt 90-100 degrees temp or its a bit low ?installed a new oil pump

my oil pressure is like 20 psi,when oil temp is like 100 degrees at 1000 rps.is it ok :).Should I put a washer in the oil pressure relief valve,will it be ok or will the pressure increase ? using Castrol edge 5w40 synthetic

if i put a sandwich kit I know that ill have to grind the power motor plate off a little bit,do i even need to take off the Ac compressor.

thnx again .... :) just got happy to know that i dont have to make a T to fit in the block because these things break easily,and a sandwich plate dont even fit without modifying it

just got a oil pressur meter.will it be ok if i take off the stock oil pressure switch off the block and fit my after market oil pressur sensor in its plance on the block.i dont have any problem if my oil pressur light turns on,but still i can notice my pressur from my oil pressur meter.it looks...

thnx a lot for the help mate :) ......

well do i take it off normally or does it have something different.how do i clean it.i saw somewhere that they take it apart part by part like springs and there is also a lock type ring.do i take everything off or just unscrew it normally and clean it with a carb cleaner.will it be ok if i use a...