Recent content by GLANZA V PACIFIC NORTHWES

Any help is appreciated. I am looking for stock springs for front and rear. These Tein S are too low for me. Eventually I will save and grab some coil overs. EP91 Glanza V 4efte. Hard to find LCA's with ball joints. My steering wanders under light acceleration. Doesn't move while braking. I...

I know you can test your thermostat inside a pan of water with a candy thermometer. But it's easy to just replace it if you can find the right one. I personally squeeze all the coolant hoses with the radiator cap off until I am satisfied there are no more bubbles. hmmm Right now I am looking at...

https://www.rockauto.com/en/moreinfo.php?pk=814689&cc=0&pt=6916&jsn=729 Looking at that part number from another forum member on another forum this looks like it could work. Bobby06 from toyotaownersclub with a post from 2013 noticed that this one worked on the ep82. so a good chance it could...

Sorry about the late response. No photos. I got most of it done. Took a few hours but its drivable. Thank you. If I could find a way to hold the piston so it doesn't move and won't be scratched for next time I take them off I would go that route. Instead of applying force to the nylon nut with...

I replaced the brushes in mine after cleaning it all up. Now a year later I took it out and one side wore down so far it broke apart and now the motor is trashed. Please help me locate a new blower motor. Mine has the automatic air conditioner controls. And I’m located in America so it’s very...

I’d like to find someone with the original springs all around. I’m a little tired of the TeinS that came on it. With the snow coming I need the clearance and the studded tires.

I wasn’t taking them off. It was after they were installed that I noticed the nylon nut would not tighten all the way up against the top flat washer. So the driver side rear is done with two added fender washers. But the passenger rear broke on top. Vise clamps aren’t working and I tried to...

Hello all! i recently replaced my rear OEM shocks and front struts with the Sachs brand I got overseas from Tuning development UK. I noticed that the rear shocks didn’t tighten down enough with the nylon nut they provided. I grabbed some fender washers and used it on the right side. The left...

Looks to be gone already. Thanks SKINY. I will reach out to them and see if they can procure them or anything else.

If I had FB I would probably try to order from that person :). Looks in decent condition.

I wish I could order from the dealership some days over here. I decided I will make a custom pair that lights up when driving.

I will look into building a custom one that is lit up when the car is on for both front and rear. I sort of like having no badges. But now I will want to keep showing it off. A few days ago a cop tailgated me. Then at a light pulled up alongside to ask if it was the GT TURBO. Told him it was the...

Jay, thanks for the links and information. TEIN USA did say they can special order them as long all the money is paid up front and I do not try to cancel etc. i think it could be worth it as an investment and an experiment.

Good day! I am located in USA. And the local Dealerships told me they cannot order anything unless I find out the part numbers first. And I cannot go to local websites to order parts. I am not sure about what part numbers will work from was it Tercel/Paseo? I am looking for: Clear cam/timing...

Do you have any idea about part numbers for shocks and struts from KYB for the EP91 Glanza V 1997? And are there any parts still available that you have posted? I am trying to find some stock springs, the glanza badges and the rear cargo clip that the speakers sit on. Thanks for any helpful...