Recent content by haydn28

  1. H

    Speedvision 270/280 cams

    Good read , Thanks bro
  2. H

    Speedvision 270/280 cams

    he didnt have any . contacted via Facebook these engines can make lots of power with a good head work . shame the aftermarket does treat it well
  3. H

    Speedvision 270/280 cams

    no specs when contacted
  4. H

    Speedvision 270/280 cams

    Any one knows the duration @ 1mm specs . ? If some one has degreed them on installation what figures did you get? Thanks
  5. H

    Aem ems4

    i cut the exhaust cam of an sr20 aprox 3 inches long ( you will need to take off the cover and line up the sr dizzy on the cam to get length) to make an adaptor to our 4efte cam. the stock sr20 cam slot fits the sr dizzy , i just ground the other cut side to fit the 4efte cam slot, NOTE u...
  6. H

    TERCEL1: Another PERSONAL BEST

    Great job Alf ,i assume u dropped tire pressure for that 1.6 60 foot? got my tercel to 11.8 last run, looking to get a time like yours this time around.
  7. H

    Aem ems4

    Got through wit it! i went ahead an installed an aem ems4 and tuned it to 25psi made 365 to the Wheels . didnt bother to use the stock distributor , i used a fwd sr20de distributor to get the optical cam/crank sensors ,its much better than the VR sensors from 4efte. used the base calibration...
  8. H

    Aem ems4

    anyone using this on the 4efte? looking for reviews
  9. H

    Trinidad Tercel

    the track surface is not friendly to FWD in Trinidad :( I may be making the trip to Grenada (where the surface is MUCH better) hoping for some 11s Also i will be using 24.5 x 8x 15 tires to get that 60' down and some more power to boot. here is the vid of the drag weekend ::cool...
  10. H

    Trinidad Tercel

    Hey All, I'm from Trinidad WI. I've finally hit the tracks with my 5e tercel , recently tuned on 92RON and methanol injection with an Apexi Power FC to 300 WHP , 22" MTs , TRD LSD , TRD MR2 suspention, stock axles . Got 7 passes : 12.5s 12.8s 12.4s 12.3s 12.3s 12.2s last past is the vid ...
  11. H

    act vs competition clutch

    I am getting the option to buy the stage 5 competition clutch or act extreme kit , both discs unsprung. Goal: I am looking to hold 350wtq . without going twin plate Need some help deciding ,Thoughts are welcome :)
  12. H

    thoughts on competition clutch kit stage 4

    will it grab 350 tq to the flywheels? :confused:
  13. H

    2nd gear issue

    Problem Solved , reopened the gearbox , 2nd gear seemed worn , used another secondary shaft , shifts clean now !!!
  14. H

    2nd gear issue

    i did change the sugar cube same problem :( gonna change the slave cylinder and see if it helps
  15. H

    2nd gear issue

    it shifts clean in to the rest of gears at high rpm .... thats why i didnt think hydraulic pressure..
Top