Recent content by RoyalDutchie

  1. RoyalDutchie

    Removal abs sensor rear glanza axle

    Hallo all, Been trying to remove the 2 rear abs sensors from the rear axle I've spare. Bolt came loose no problem and can me the sensor, but now they seem to be stuck on the little bump up to the bigger size. Can they be removed from the axle without removing the discs? The bit it gets stuck...
  2. RoyalDutchie

    Clunk/Thump over very minor bumps

    Suspensionwise everything is checked same with the coilovers preload on the springs has been set again. No play anywhere. Bushing etc still look pretty new actually. Also have a set of buddyclub rear shocks which are fine and rise on there own can swap them in see if that sorts anything. I'll...
  3. RoyalDutchie

    Clunk/Thump over very minor bumps

    Update/possible problem: I currently own this glanza, seems the issue is no gas pressure in the rear shocks, once pressed in they do not rebound. Not sure why this results in knocking yet, by the looks of it they do have oil in them, rebound adjustment works fine and now sound of air...
  4. RoyalDutchie

    Greddy turbo timer and apexi turbo timer pnp

    Can post it for €53 insured to Ireland.
  5. RoyalDutchie

    Greddy turbo timer and apexi turbo timer pnp

    Using the forums to the best of it's ability
  6. RoyalDutchie

    4efe or 4afe box + 4efte in a Corolla E11?

    You mean those blocks with springs that sandwich between the current gears of your open diff? Not a massive fan of those, but never had them, so can't really give an opinion how good or bad they are. Sure they should wear out the diff or get very unpredictable quickly?
  7. RoyalDutchie

    Diecast Models

    https://www.toms.nl/searchresults?tsm=&h0=&bx=&nobotcode=1664042203&cid=&mid=&fid=&jid=&schaal=&artikelstatus=1&zoekwoord=starlet I always get mine from there, but well, they are a bit more local too me than to others I guess.
  8. RoyalDutchie

    Electrical issue

    Doesn't the ecu throw a check engine code?
  9. RoyalDutchie

    HKB SPORTS BOSS KIT for ep91 facelift

    Nice one, I'll be ordering one for sure.
  10. RoyalDutchie

    Brake master cylinder stopper ep91

    Also not very easy to fit that one
  11. RoyalDutchie

    HKB SPORTS BOSS KIT for ep91 facelift

    Yes it is indeed a 98 spec
  12. RoyalDutchie

    HKB SPORTS BOSS KIT for ep91 facelift

    But does the horn work with this one? the other much cheaper kit that is currently on doesnt work with the clock like spring on the steering hub which makes the horn not function. Seems the current kit with the golden ring is used for a contact point for the horn while a glanza uses a diffrent...
  13. RoyalDutchie

    HKB SPORTS BOSS KIT for ep91 facelift

    I've been trying to pinpoint which boss kit I should be using. Using search seems to yield no post. Currently have a OT-48 which isn't the right one since the glanza has a clock type system. With a bit of searching the right option suppose to be the OT-202. Seems to be this kit which notes it...
  14. RoyalDutchie

    Piston Rings

    Would check the turbo aswell, a bit of metal through the vins won't do it any good. If it went through the wastegate it should be good.
  15. RoyalDutchie

    C161/162, how weak are they actually?

    They are indeed a bit weaker, but the c160 copes with 162nm stocks so should at least be able to cope with 200nm. launches etc probably arn't well received by these boxes I would imagine. I've been trying to get a c60 gearbox hybrid fitted to the 4efte, but haven't been lucky since I not able...
Top