Recent content by starbophil

hi mate i recently fitted fmic which meant i had to fit breather filter, i also started to get smoke on tickover blue tinged a bit oily smellin, fiting a breather filter defo effects the way the pressure is escaping from the crankcase, when on tickover ur butterfly on your carb is closed which...

hi mate im also fitting catch can did you find out wot size hose you need?

hi, i have reccently fitted front mount intercooler and relocated air filter which meant i needed breather filter on rocker cover and i replaced pcv valve with new one ever since iv had blue smoke on tick over. im finkin excess oil is goin in inlet mani from pcv valve due to mods. wots the...

realy, seams odd. the chips are as you said on side of lobes just hope the fragments havnt done any damage internally! im sure the smoke problem must be turbo related. can anyone describe symptoms of oil seal in turbo goin? would that cause intermitent smoke on tik over? from what i...

oil been changed regular by me, not sure about previous owner, i only noticed the chips on cams because i took rocker cover off to spray. the car runs absolutly fine but im considering replacin cams as thers a pair on ebay 40 quid no chips. as i said car rus perfect but still smokin the smoke...

hi guys, recently added sum mods to my glanza. the turbo was removed fitted fmic hks actuater ss mani ss decat new filter added breather filter on rocker cover as removed tmic piping before i added the mods i noticed a bit of white smoke on tik over but now it is pretty bad sat at...

thanks for the info bud

yes iom getting rid of efi pipe and having a 90 degree elbow coming straight of turbo, im changing actuater mani and decating it. the pipe comes from driver side of engine and goes into efi pipe. do i just block this off then? im doing this to a glanza if it makes any difference

im currently fitting fmic and relocating air filter, the black pipe coming off turbo to induction filter has a hose going into it jus under hot pipe on tmic the hose gos to side of engine. when i relocate the air filter what do i do with this hose?

hi all i bought an electronic boost guage brand new off ebay, its a apexi EL system meter series. i plumbed the boost sensor supplied with the guage into the into the boost pressure sensor pipe located on the bulkhead this is the pipe with the inline filter (round rubber thing in middle of...

hi all im just fitting my boost guage, wiring sorted just trying to plumb the boost preesure sensor suplied wit guage into boost pipe. will it read boost if i plumb into pipe between inlet mani and bov?

hi im currently modding my glanza to run 1bar on ct9 hybrid, iv just bought new walbro fuel pump to replace old worn out pump. any1 got any tips on how to fit? were its located?

hi guys im looking for a rrfpr good enough to raise fuel levels to run 1bar on ct9 turbo. iv seen fse power boost valve with adjustment guage for 100quid, thought itd do job plus could monitor pressure adjustments via guage. anyone recomend these or any other rrfpr? cheers

theres a website called ep tune, sell original oem gaskets on there! they look good ones id stay away from cheap shit

thanks for advice guys!! i was umin an arin over gettin tongs stage 1 hybrid with ported wastegate for better boost regulation, i jus wanted to get my use out of stock ct9 as it feels like its got a fair bita life in her yet, would buying the hybrid be advisable? iv been looking at fuel...