Recent content by Tercel

  1. T

    Most annoying oil leak EVER!

    Are you sure its not the cam seal running down slowly and pooling where the head meets the block?
  2. T

    Glanza not starting. Please help.

    Sounds more like a stuck starter to me. Try what dac69er said and give it a few good taps. If it fires up right away then you know you need a new starter. Anything else to do with the charging system probably would have given some slow cranks of the engine before going completely dead.
  3. T

    "Rear swaybar" and "Increased castor bushing" reviews wanted

    Rear sway bar is a must. Makes the car handle way better...however you probably wont get the full benefit on standard springs.
  4. T

    Coilovers and Antilift Kit

    I've tried two different sets of wheels and it handles pretty much the same. Anyone know if the Meisters have any built in castor? Because the ALK adds castor too and it might be too much?
  5. T

    Coilovers and Antilift Kit

    Yeah, kind of what I was thinking. The ALK made a noticeable improvement when I was running lowering springs with standard struts. With coilovers it feels like the front suspension travel is almost binding. Turning side to side actually seems LESS snappy than with lowering springs and KYB...
  6. T

    Coilovers and Antilift Kit

    Just wondering how many of you are running an Antilift Kit as well as coilovers. The front end doesn't feel very planted and seems a bit floaty. Yes, the top plates of the Meister-R's are correct and closer to the firewall. Tracking is good and camber is set to -0.5°...so not a whole lot...
  7. T

    Stuck stub axle - advice needed!

    The axle nut is off right? :P
  8. T

    what gearbox can i use

    The tercel c51 box is weaker than the ep82 c52 box. Your best bet is using the c52 box that was made for the 4efte
  9. T

    HELP I've hit a curb with my starlet!!

    1deg of camber isn't very much to be off, so you most likely won't be able to see what's bent. Those camber bolts are called crash bolts for a reason
  10. T

    HELP I've hit a curb with my starlet!!

    You definitely bent something. You won't be able to get a full 1 deg of camber out of the shock bolts by loosening them. You'll need to buy some camber bolts like these: http://www.energysuspensionparts.com/proddetail.asp?prod=MOOG-K90208 Also, Paseo axles should fit the starlet no problem...
  11. T

    E-Manage Blue

    I'm guessing the banana is the source of your problems.
  12. T

    Glanza - light, over responsive turn in, light rear end...

    I have had my meisters on for a while now and I'm still messing with them. The front end felt really sluggish and understeered like a mofo. I added a bunch of clicks to the rear, but the front still felt off. I took off my front whiteline ARB and replaced with the stock one (left the rear...
  13. T

    Sticking in first gear!

    Check the condition of the rear motor mount. If it's shot, the engine rotates a lot and can make changing gears a bit stiff.
  14. T

    Oil leak getting worse

    Don't know for sure, but the cam seals might be the same as the first gen 5efe.
  15. T

    D1 lug wheel nuts keep coming loose so dangerous HELP

    Buying cheap alloy nuts is asking for trouble...the composition of the alloy is key for the strength and keeping the threads from stretching/coming loose. I was a little nervous putting alloy nuts on my car, but I've had no problems with the Rays Duralumin ones. I just put them on, re-torqued...
Top