Search results

I have a ME221 going in but with a 4E corolla Crank trigger, should hopefully help with the cam trigger issues

are company vans allowed roo ha ha

Head is the same casting as far as I'm aware only differience is the cams.

I would sand it down and superglue/apoxy a plastic washer on there. If it does come loose then at least the washer will stay where it is

I might get my car back in the road next year hopefully

Like skiny said, lithium greese or good old farmer greese as we call it is great stuff I use it for loads including keeping rust away. I also have a ptfe greese that I use called Superlube that is great. I usually put a layer of superlube down then a bit of lithium over it for places where the...

I can't see how this would be possible, number 1 the clip isn't actually holding the wrist pin in place it's just restricting the movement of it. Number 2 the only force that would be acting on the clip its self that would make it worth while thinking about would be that of the change in...

Could be a Bad Hazzard switch or connector, I found out the hard way one day that without the hazard button in place or working properly the indicators don't work.

I have one here, needs a recondition but solid enough. PM me and I'll send you on my WhatsApp to discuss

No Problem, post a picture of it fitted if you manage to get it.

A blanking plate for the scoop popped up on adverts in ireland http://www.adverts.ie/28485863

Took me 2 years of waiting and watching adverts to get a reverse scoop

People will think I'm working for them at this stage but try http://86aero.com/product-category/ep82_gt_starlet/ for the spoiler

Could be Lambda.

Stick me down for a copy too corbett1235@gmail.com

The link is a bit strange. Just type it into Google search manually

yea they have a few nice bits in there, still no livesports wings though :(

Replica Rear oem lip can be got on ae86aero.com

First port of call would be to check the coolant temp sencor.

Thanks guys for the suggestions, I want to get her running standard before I go onto the Standalone/Hybrid and all the joy that will bring me. I have a 3bar map sencor on my boost controller that I'm going to use as a signal for the ecu, also looking into an analog TPS. So they are two parts...