Search results

  1. aubreygil

    Boost issues

    Got a sensor and it solved the issue.
  2. aubreygil

    anyone selling a ct9 manifold

    Who's this Parker guy lol
  3. aubreygil

    Wanted: glanza/gt turbo map sensor

    Hoping it's the key to solving my current issue and finally get the corolla on the road.. If you have a map sensor please contact me, thanks
  4. aubreygil

    Boost issues

    Definitely the one posted above that I need
  5. aubreygil

    Boost issues

    Just as we were going for the diagnostic pins I copped the above map sensor said to myself that's not right haha hopefully this is the issue certainly wouldn't be helping. So it started lashing rain, closed the bonnet and got online
  6. aubreygil

    Boost issues

    So update!! This is the map sensor that came with turbo bits I bought for the project. Doesn't look turbo to me
  7. aubreygil

    Boost issues

    Thanks for that, what happens is the car drives fine until you hit boost. Boost gauge wont go past .5 When I drive on into boost the eml comes on and it starts to misfire and pop. The eml goes off by itself when I go back to driving off boost. Pulled the plugs and they'd fairly sooted up black
  8. aubreygil

    Boost issues

    Could well be
  9. aubreygil

    Boost issues

    I'll have to do the check. Engine management light comes on when it misfires then goes off when I drive it normal off boost
  10. aubreygil

    Boost issues

    Took a spin today after hooking up the boost gauge. It will only hit .5 before it starts to splutter and misfire. It won't go above .5. Plugs were fairly sooted when I removed them. Could a faulty hks actuator be culprit here? The engine came from a GT and had no issues
  11. aubreygil

    Rev gauge jumping

    Thinking electrical as when it idles engine sound is spot on not hunting etc but the needle on the rev gauge is hopping around.
  12. aubreygil

    Rev gauge jumping

    Finally got the 4efte conversion done on my E11 corolla. Can anyone shed some light on why my rev gauge would be idling all over the shop
  13. aubreygil

    Vacuum piping and Front mount intercooler

    Cheers , I probably should've stated I have an fmic kit supposedly from a Glanza but looks a bit of a puzzle
  14. aubreygil

    Vacuum piping and Front mount intercooler

    Yet another question Has anyone any photos or diagrams of all the hosing/vaccum piping around the intake manifold ? Looking for a fmic layout also. Thanks in advance
  15. aubreygil

    Wiring ecu question

    I'm back again with another question.. so the corolla loom has a wire to the ecu labelled cooling fan but this wire has no pin location in the Glanza ECU ... Anyone have any idea why or what way to go with it. Thanks in advance
  16. aubreygil

    Boost solenoid bypass questions

    Thanks Jay
  17. aubreygil

    Boost solenoid bypass questions

    Cool any updates on ps pump and bits
  18. aubreygil

    Boost solenoid bypass questions

    Sorry wrong pic
  19. aubreygil

    Boost solenoid bypass questions

    Lovely stuff thank you
  20. aubreygil

    Glanza cat question

    Do you think the corolla cat will be restrictive? A downpipe or decat pipe from the turbo down then straight to the corolla cat to that system in the photo
Top