Search results

  1. N

    Start up Knock

    knock sounds like the top of the engine new piston rings ,main & conrod bearings and cometic head gasket it only knock for like 2 seconds really fast the it stops
  2. N

    Start up Knock

    Also … I had installed a cometic mls head gasket and noticed that it leaks oil around the meeting surface of the block and head
  3. N

    Start up Knock

    Hi guys … just did an overhaul on my 5efte engine and I notice… there’s a knock for the first few seconds of the start up… what causes that issue? Please help! thanks
  4. N

    5efte compression

    hello guys another quick question. im getting oil in cylinder 1 and 3 since i used the metal gasket im noticing that dont know if is becuase im not using headstuds maybe i torque the head down to 70ft lbs and still getting oil in the cylinders i notice right around the cylinder there is a sweat...
  5. N

    5efte compression

    yes im glazed the cylinder walls with a hoaner
  6. N

    5efte compression

    thank you very much for the info turns out the blockk was wore
  7. N

    5efte compression

    Hi guy good day im trying to find out how much compression my 5e should have right now im getting 90 on all cylinders im currently running 4efte pistons and a .51mm cometic headgasket noticing plenty blow by please help
  8. N

    5e TD04

    Hi guys quick question I have a 5efe with the skinny rods and I got a TD04 paired with it What’s the max amount of boost I could run? I have the 4efte pistons on the 5e rods. And cometic headgasket with standard headbolts
  9. N

    More Power!

    hi guys just typing to get some pointer to make som more power on a stock car with only a adjustable actuator
  10. N

    Conrod bearings

    No it’s not damaged I’m just doing a complete rebuild and just want to install the correct bearings
  11. N

    conrod bearings

    hello friends anybody knows if the 5E conrod bearings is the same as the 4E
  12. N

    4efte manual

    could you please send me a copy renaldomarshall2@gmail.com
  13. N

    Conrod bearings

    another quick question guys ? is the 5E and 4E conrod bearings the same ?
  14. N

    Conrod bearings

    oh ok ... is there any specific bearing code to type ? im not trying to get standard bearings because they cause me engine to have a slight knock at around 3-4000 rpms
  15. N

    Conrod bearings

    is this for the 4efte ..... when i search the original code im getting different part numbers for the mark 2 bearing
  16. N

    Conrod bearings

    Not see them could you send a link if possible
  17. N

    Conrod bearings

    Thanks bro let me check that out
  18. N

    Conrod bearings

    Hi guys just wanted to know if y’all know where I could find some mark 2 conrod bearings code 13041 10020 02
  19. N

    Complete harness (fuse box)

    Hi guys could anybody send me a link of where could I buy a harness for my glanza v
  20. N

    Hks ecu

    Hi guys does anyone know about the hks f con ecu ?
Top