Search results

Urgently require a set of leads / dont mind stock leads. My number 1 lead is acting up and giving me a nice little annoying misfire underload in 4rth and 5 th gear. Problem : Im in South Africa, so suplier would have to be able to ship/post it to me. No problem with doing EFT's...

staying with the quickspooling ct9 would be an easy option, but after 3rd gear there really is no thrust, well nothing like there is with a bigger turbo or like there was with my uno. Stock wise the uno came with a garrett T2 on the 1400 8v the starlet power stock compares to a stock Uno...

Im urgently requiring a towbar... but parts are not available for the starlet in South Africa. are there any other cars that you guys know of that I might be able to retro fit off? Thought about the Toyota Tazz Toyota Conquest Toyota RunX any ideas?

#^%#*^)_%#!! :(

A nice daily driver. well currently stock but looking at a TDO4L with daily .9bar boost. Temps out here get hot and a normal summer day could see 40c easy. A front mount could be better. Im not interested drag racing or streetracing, I just want something fun, should I take it to the...

seems pretty decent figures for a daily driver!

What is the ideal cooler size for the starlet? Is it really necessary to cut the bumper?

parts are a problem out here. Bringing one over from Europe will just cost wayyyy too much.

I know the stock manifold is extremely restrictive, but how will a TDO4l fair on a stock 4efte with a 63mm downpipe into the stock exhaust? Take the stock manifold and join a new flange on it, will it be worth the effort? Looking for just a little more midrange...

have you got a rough estimate on the TDR ones vs the magnacore?

low tens i would imagine, maybe even high nines...

what brand can you recommend?

is it worth the swop or should I rather look into the 3sgte?

This motor is almost bullet proof and can make a lot of power with a very minimal setup. Would the 4 Agze bolt into the stock engine mountings? Will the gearbox be up to the job? Aftermarket management is really not a problem, there are so many available out there. Ive seen a...

My 4th pluglead has broken off completely inside the plug. Ive fixed it with a wire, but its only temp. Car will misfire once or twice in 4th gear under load if I flatfoot. I cant get plugleads in South Africa for the car, so my only resort is to import either aftermarket leads or get a...

Best ive gotten is 340km's to the low light. stock standard with 17's

Ive seen some 4agze's(still supercharged) with turbo's fitted, also the mini cooper S with a Td05. personally, better off building a proper turbo motor and setting it up accordingly.

aah then he might have gotten the glanza based 4e-fte My leads have a little clip onto the dizzy, and my 4rth cylider lead broke off around the plug, so now i need a new lead. the car still runs fine, but occaisionally under engine load, I would get a misfire... but only now and then. But when...

that much hey? is your clutch still stock and is it holding up?

a mate recently bought an imported 4e-fte, I asked him if he wanted to sell me his old "blown" motors plug leads, and he told me they were not the same as the motor he bought? My leads clip onto the dizzy and he told me those had a sort of a spline or something? can anybody confirm...