Search results

Now equipped with a 2.5-3inch side exit exhaust and some 16kg/mm rear springs to control squat the EP71 Turbo S set a new PB with a 13.01 @ 103mph at the 4 and Rotary Nationals 29th Jan. So close! We headed back to strip yesterday having built some additional circuitry for ECU controlled...

Finx just recently set a new PB running 13.104 @ 104.74 MPH EP71 Turbo S Running a 5E-FHE with slightly raised CR. Standard pistons/rods etc. ACIS intake manfold Custom exhaust/intake/intercooler setup Megasquirt MSII ECU tuned by Slostar 0.8bar boost No nitrous, no water/meth...

What we have here is a twin pot brake calliper from an AE111 BZR/BZG or AE101 GTZ bolted to an ST202 Celica calliper carrier (the bracket that attaches to the hub) which is bolted to an unmodified Glanza hub with 275mm rotors

http://www.mmc.org.nz/forum/viewtopic.php?t=62449&postdays=0&postorder=asc&start=0 Speedtech motorsport specialise in Mitsi based cars, primarily EVO's. Here's their latest customer project, a drag orientated Evo9 running north of 1000whp and (eventually) low 8 second 1/4miles. Of particular...

Time and time again I hear the English crowd moaning about how their track is uphill and their times are never as good as anybody else. I'm getting pretty sick of it, so to try and help somebody over there finally run some decent times I've decided to post how I would build a Starlet to do 11's...

Hey guys, I'm in the process of designing my cage and am hoping to collect some images of caged EP's for some inspiration. At this point I'm thinking main hoop + single diagonal plus harness bar, rear hoop single braced, X door bars and stubs through the firewall to the strut towers...

I'm forever hearing of people blowing up engines and 'going forged' What I propose is that we collect some details on all these failures and work out some common causes. What we need for this to be a useful resource is as much detail as you can feasibly provide about your exact setup. The...

In this FAQ I am attempting to cover everything required to assemble, install, configure, tune and enjoy a megasquirt based ECU into your EP82/EP91. Included will be Starlet specific assembly instructions, pinouts required for making your own plug in adapter to the stock wiring loom...

KP47 Starlet from 1973 180hp @ 9500rpm from an NA 1300 with mechanical injection, ITB's, slide throttles and a DOHC head! http://www.youtube.com/watch?v=PoLi8NZJYu0