Search results

hi guys, i tried to get the answer in another thread but it seems my post isn't posted and/or deleted!?! Im planning a rebuild on my 4e-fte ep82 and I was wondering what compression ratio should i get with a thinner 5e-fe metal headgasket. I was looking to bump the compression to be as close...

In psi, what is the standard compression in a healthy 4e-fte ep82??? 170PSI??? I was looking to get a compression test done but we dont have the numbers to look for... what are the tolerances like between 160psi and 145 psi???

Hi guys, i have my 4e-fte ep82 lsd tranny on the verge of blowing. I purchased a 5e-fhe with his oem tranny (26000km). This is what I plan: -keep the 4e-fte casing and bellhousing and lsd because i notched the casing to give place to my downpipe. its a absolute keeper to fit my setup. -keep...

hi guys, i plan to build my engine shortly. i bought a too damage to repair 5e-fhe. i plan to build a hybrid 4e/5e-fte. so far, i gathered those parts. -4e-fte cam cover -5e-fhe cams -5e-fhe ported head -4e-fte pistons -5e-fhe rods -4e-fte and 5e-fhe crankshafts. Which one to use for a...

TO ALL APEXI's OUT THERE... Hi guys, i have a 5e-fhe ACIS manifold on my ep82 4e-fte. My question is: is there a difference between the two TPS?? -I have an APEXI NEO in my car and when i do a sensor check to get the good voltage output for the ECU to the TPS, it gives 5v (0%/closed...

Hi guys, i was wondering, is it a M9 12points tool to remove the head studs? the only tool missing to rebuilt my engine.

Hi guys, i plan to rebuilt my newly purchased 5e-fhe. I found a kit on ebay, pretty affordable. Can you use that kit to rebuilt a 5e-fhe or we need to get a 5e-fhe rebuilt kit?? Is there something missing in that kit to rebuilt the engine, i plan to rebuilt with the STOCK pistons though...

Hi guys, my question is: -When changing the air-fuel ratio with the Apexi NEO, do you calculate the difference in %? Exemple: when running 10.5 afr at WOT, if i want to change to 11.2, the difference is .7AFR, correct. So the difference in percentage is 6.5%. So do i change 7% in the neo from...

Hi guys, im running a gt2560R, fmic, 12pounds, and a batch load of other parts. i was wondering why when hot and under boost, it smells raw fuel after a short burst of boost. Exhaust backfires WHEN HOT but nothing serious. im running standard ignition, bcpr6e platinum plugs (i tried iridiums)...

im in the process of building a 5e-fthe HC with the turbo kit i have on my 4e. electronic-wise, is the 4e ep82 manual tranny ecu compatible with the 5e-fthe sensors. the kit is : custom manifold t25 flanged, t28/t25 hybrid, 2.5 inch straight exhaust, no cat, 5e ACIS intake manifold, FPR...

Hi guys, since I done my 4e swap in my tercel, I replaced the o2 sensor with a AEM wideband kit. I spoke with my tuner about my closed loop too rich problem, it black smoke before 4000rpm and runs 11's afr at higrway speed (2800-3100rpm). im pretty confident it is the problem, no oil or valve...

Hi guys, i got a deal on a 5e-fhe for 350$can with a plethora of other parts. The engine seems in good shape (no leaks, no gunk compression all good/equal) What you guys think in putting my whole turbo kit from my 4e on that 5E with stock compression (9.6:1). I know you guys will write...

Hi guys, i bought speedvision's 440cc injectors lately (Great price and product). I was wondering if I would have to tune a/f ratio and timing to get them running fine? I have a T25/T28 at 1bar and proper fuel delivery system (wrx fuel pump, FPR, apexi neo and AEM wideband) The winter...

Hi mates, I was wondering if any vendors build a t25 flanged stainless exhaust manifold. I got mine custom built but the thing is he built it with oversized runners. It may lose pressure and causing lag. It is thoroughly built though, 16 gauge mild steel equal lenght runners, it weighs 15...

After my 190whp setup, i dont have enough brakes on my car, burned my brakes 4 times since my upgrade, smoke and fire in the wheels... now its time to upgrade. but since a tercel (1994 4 door non abs) is not like a starlet, i was wondering if you guys are familiar wit hthose type of cars...

After finding out that i maxed out my injectors (stockers) at 50psi fuel pressure with my t25/t28, i cant figure which injector size to go for??? 440's??? im tuning with apexi NEO and an adjustable FPR, AEM wideband... im trying to fing 440's high impedance (13.8 ohms) top feed -OEM-...

i have a bad leak on the oil pressure switch on the bottom of the block near the tranny. i tied it for the oil supply for my custom t25 turbo. i was wondering what is the thread pattern IN the block to get the good adapter. Is it 1/8 npt, fine pipe thread... i have a bad time with that leak...

hi guys, i hooked up the apexi neo air/fuel controller on my 4e-fte equipped tercel (corsa). the car is currently running pretty good but because i upgraded the turbo with a t25/t28 and custom manifold, i think the ecu is still on the ct9 fuel trim/mapping. because the ct9 is smallish...

Dear TGTT members, i need your help. I got my car back this noon from the exhaust shop and im pretty pleased by the sound it makes, it sounds very deep with throaty burbling, no cat no muffler 2.5inch straight through exhaust system. (about to be muffled thought!!!) When i took the car...

Im pretty new to the 4e-fte. i swapped one in my tercel and im at the startup setup. i cant figure how to set a respectable idle off the engine. i was wondering which nipple should i use to get to run normally and Where is the idle air controller valve or mechanism??? At the moment, every...