Search results

When i reverse then drive off in 1st a puff off white smoke comes out the back! Any ideas clues? thanks in advanced stew

Hi, my glanza has recently started to smoke slightly, white smoke when pulling away and reversing. I have a fmic, fcd, adj actuator, apexi filter and decat running on .8 bar. Munday the legend that he is has recommended that i do and oil change and forte seal conditioner to try and prevent...

Saw you park up outside liquid. I was in my EP91. looked pretty kl with the odd wheels on! If i see you out again ill say hi!

I have just broken my PVC valve whilst removing my rocker cover, it was incredibly brittle and just broke apart in my fingers. Will my car run with this broken ect? i can bodge/glue it to the rocker cover for a while until i foind out the part number and replace it! Any help would be much...

Thought i would see ho much interest there is in doing a meet at south mims. Details as below: Sunday 5th July, 7pm onwards. Nearest Towns/Cities: Potters Bar (3m), St Albans (7m), Watford (14m) Map: http://maps.google.co.uk/maps?client...image&resnum=1 J23 on the M25, J1 on the...

Hi peeps! My clutch is on the way out and im going to upgrade, What do you run and which do you rate? Any help would be great, Thanks in advanced. Stew

Spotted this earlier this eveing, flashed you and you gave me the tumbs up! Black Glanza with blue auto x's or black alloys with a blue lip, i think you came to the hatfield meet! If someone on here then would be good to know if youre local! Stew

Sorry im sure that this has been covered plenty of times but i cant seem to find any advice on where is easiest to wire my bost gauge to. I would like to wire it to the head unit or to the main loom. I need to find a positive, earth and ignition cable to wire to, any ideas as to what colour...

Ive got a HKS Adjustable actuator and am trying to find some instruction that helps me identify what boost i am running by measuring the shaft length? Does any one know where i can find this info? Thanks in advanced

I need some help peeps! I was driving today and the engine management light came on, i pulled over and did the fault diagnosis check and the code i got was 34 which is turbo pressure. I think i hit fuel cut also in 3rd around 6k rpm as the engine cut out then carried on again. Is this...

Hi Peeps, Just wondering if i have a striahgt thru system, i.e decat and straight pipe to the back box will it spit any flames? How does this happen and when in the rev range does it happen eg on over run? Cheres Stew

Im looking at relocating my air filter. What setups do people have on thier EP91, which work best and give noticable difference, any problems with them etc. Also where did you get them from? Any help would be great! Stew

Helo people, Im about to fit a decat to my ep91 and want to no if i need to get some new gaskets whist doing it? Is it a bitch of a job to replace the cat as my mot is due in july so is it worth waiting until after that to do it? Cheres Stew

Hello lads, im needing you advice. Ive been offered a swaps on my glanza for a mint S13, j reg. What are you opinions on these cars, any one driven them or been in one? Is it worth a shot? Any light shred will help greatly. Stew

Hi, Ive recently fitted a bailyes dump valve to my ep91. Had it on for about a week and no problems but this morning after i drove to silverstone about 1.5 hours i opened the bonet to find oil had obviously been seeping from the dump valve, the under side of the bonnet had oil on it also...

Hey guys noobie here again! Ive got a baileys BOV for my EP91 and want to fit it but the top hose connector is too small and the bottom is to big for the piping coming off of the turbo! Also do i just leave the stock one in place as it leave a gash hole in the inlet pipe! Can i get an...

Hi peeps, I am about to fit my HKS FCD and am trying to locate the ECU on my EP91, also any tips or diagrams on fitting it? Cheres Stew

Hi guys, Im in need of some advice for my ep91, Its on a CT9 with around .9 to 1 bar of boost, HKS FCD, Apexi Filter, HKS Adj Actuator and Jasma Cat back. Do i need to fit a RR FPR to my car to help the fueling. If so what sort of pressures am i looking to feed the fuel in at? E.G...

Im goin to the pod on the 5th of april, Ive got an PE91, running 1baror boost with paexi intake, HKS FCD and that about it. Wht sort of times should i expect to get? also ive got some 15'inch bbs rims so was wondering what sort of tyre pressures work best! Any help would be great! Stew

I need some opinions on splitters/lips for an EP91, i have around £200 to spend and want to no what i can get for that and where from! What do you lot run atm! Any help would be great! Cheres Stew