Search results

Hi all, gonna port standard mani, had a quick search but all seems pretty vague, anyone have any pics or roughly how far I can go with it? Don't wanna buff right through the treads of the stud so there is a hole in mani Cheers in advance for any help/advice Raymond

Iam lookin at buyin a mani, have one on the car already but it is a s/s one and has cracked twice now :( Was lookin for opinions on sps mild steel and the zisco ram horn one for the ct9, would anyone know if the zisco one comes with a coating on it like the sps one does?? The race coating...

Hello all, just had some sparco crimson wheels refurbed and want some red wheel nuts for em, been lookin at the ones on toy tuning but not sure if they will fit due 2 the very small holes Can anyone help?? :confused: Raelly want anodised red wheel nuts Thanks for any help Raymond

Hi all, fitted some kyb exel g rear shocks prob about a year ago, just started gettin a rubbing and banging from the rear, i thought it was a trim problem as the back seats are out and i built a speaker box, was strippin the trim panels and noticed that on the n/s/r it looks like the insert of...

For sale:Greddy boost cut controller Item Condition:used but in mint condition Price and price conditions:£65 delivered Extra Info:not needed due 2 me buyin a jam ecu :p Pictures: Contact Details:pm Location:Glasgow Delivery & Conditions of Delivery:delivery inc. in price

Hi all, could i get some info of people who run these??? Thinkin bout gettin one, gonna be runnin bout 200hp but the car is an every day driver so need a nice pedal not somethin i need 2 jump on :( and i get stuck in traffic alot aswell :( SO any info on the cap racing 4 puk sprung clutch...

Hi all, i bought some alpine 4" components for the dash 2 replace the standard ones, had them in for a while now but one of em starts 2 distort even when vol aint that loud, anyone know if these are not the best components or if its another problem?? If not the best components can someone tell...

Hi all, went down 2 halfords for some paint, only black spray they had was astral black, anyone know if this is correct for a 96 Glanza v??? Paint code is 205 Thanks for any help :)

Have been lookin at Craig gt's attempt and the boys further up, i think we should get a meet, i keep seein more and more gt's glanza's everywhere so why is it always so difficult 2 get everyone 2 meet up, it's been a while sinse i have done a cow run through Glasgow but remeber seein a few...

Hi all, fitted a greddy fmic yesterday, got a few pipes custom made 2 shorten the pipe run, ran the car and found that when u dont put foot 2 the floor it dumps through the filter more (which is mounted behind bumper), the noise is also different 2 what it was when i had tmic, seems louder and...

My drivers door seems 2 have dropped a bit, and also drivers door handle is loose, have removed the door card but cant seem 2 see anything obvious, handle still opens the doot abut just seems loose as if a spring or somenthin is missing, any advice on handle and door appreciated Cheers

For sale:OS Giken ORC 309 clutch, flywheel and release bearing Item Condition:Brand new, owned a few months, still in box Price and price conditions:£450 Extra Info:Selling due 2 planning on gettin different car and rear shocks need done, rear wheel bearings need done so need 2 get...

Hi all, i think am gonna move over 2 the other side im affraid and am goin for a honda integra dc2, sorry all Not sure what 2 ask for my car, spec as follows starlet glanza v 96 p plate approx 86k black toms 14" wheels rsr ti200o 30mm springs new standard front pads free flow manifold...

Can anyone tell me what this clutch is like??? Want to know if its a good clutch for everyday use as well as fast road and occasional strip use, also what is the pedal like after fitment??? much heavier? Will be runnin approx 200 hp Thanks for any advice/comments

My clutch has started slipping when u get past 0.5 bar :( So lookin to get new clutch , flywheel, slave cylinder and crank seal (just do it all at once) Any opinions on clutches and flywheels??? Car is about 200 bhp and will be fast road and occasional strip use. Appreciate any...

I have recently fitted a jam ecu and running 1 bar, went out a drive last night, had half tank of fuel, done maybe bout 100 miles or so and i am now below quarter tank of fuel, is this about avarage, seems pretty poop :( Not had the car rr yet so dont know if its over fueling Any comments...

Does anyone know the position off the small brass cylinder??? One end is slighty tapered and the other is flat, anyone know where either end should be???? Cheers

Just about 2 fit my JAM ECU, is there anything i need 2 do with it as its self learning??? Does it take a few hundred miles to get used 2 the car??? Any advice appreciated Cheers

Would like some help here, lookin at gettin a jam ecu, will i need anything else to run this???? rrfpr, bigger injectors???? i already have a 4 branch mani, seperated de cat dump pipe, 2.5" cat back, grade 7 plugs, 8.5 leads, air filter mounted off turbo to front bumper, front mount...

As above, would like to get my hands on one of these soon Cheers for any info