Search results

removed from my eunos turbo as ive decided to go stand alone ecu and use the ecu for boost control. fantastic controller with warning, peak and a few other extra features. 3 boost settings ( wastgeta pressure and 2 additional) very very easy to setup reads in Kpa price is £200...

anyone got one for sale or know where to buy one? searched but can only find the electrical ones cheers

Im in quite desperate need of a crank pulley. I made a mess of trying to attach my new trigger Wheel and now its beyond use as its out of balance :( Let me know what you got.

Searched for ages now and can only find the mk1 gt and glanza diagrams but no mk2/3 diagrams ( the cluster that has 3 plugs) the mk1 only has 2. much appriciated if anyone knows where to find the diagram even if its in Japanese!

Im struggling to find the wire that controllers the fuel pump 1994 GT: ive made a new engine harness for my link g3 which is 90% complete now. ive found the relay in the dash above the glove box which has a blue/white wire which turns the fuel pump on with 12v but is there a pin at the...

quick overveiw, i finished my new mechanic setup ( turbo, radiator blah etc) fired the car is all worked spoton, then i see a zisco inlet manifold come up for sale so i buy it. now ive fitted the zisco inlet, made a new accelarator cable and moved a fee things in the engine bay around. now the...

So ive started to making my loom for the Link G3 ecu so far ive wired to COPs and a few sensors but im at the point now where i need to fit a trigger wheel, as im removing the stock ignition setup and dizzy cap end etc for neatness. my plan was to use a design i saw on Mikey B's project a...

Racing hooks, TRD cap, Oil sanwhich plate, bonnet pins locking sold

so im doing a whole new setup on the GT now that i have the legnum vr4 for my daily car and a 5 month old baby lol... my GT will be pure track car for a few years now so im redoing alot of things: rebuilt head with ARP bolts & higher CR @ 8.0.1 instead of 7.5.1 (still forged 5e) td05 20G -...

For sale: Greddy Profec b spec 2 Item Condition: used but very good, no scratches etc Price and price conditions: £185 or ono for a quick sale ( no piss takers plz ) Extra Info: currently still on the car (my legnum vr4) but only selling as i want to buy another an E-01 ( i have one in...

im 95% sure im going to buy one, but now im at the stage im trying to look for all the bad points. this will be replacing my daily driven paseo for several reason: 1. i now have a baby :D 2. its slow as shit lol 3. i need somthing i can use to trailer my other 2 cars to trackdays ;) basically...

im trying a couple of way to fit a 4efte ecu into my paseo, but i have a question: basicallyi have a question but first 4efte distributor pinout is: 4efte Distributor to 4efte ecu pins ( numbers only for referance) 1. NE whie/blue wire (pin 21 on ecu)...

http://www.youtube.com/watch?v=Z-4v4I7Gzk0 how to drive an enzo D1 style

Been meaning to edit these for ages my clutch actualy broke on this day ( the centre piece compltey came apart from the outer part) ACT extreme clutch setup i was not happy,it slipped a few times on my first session then bust on the 2nd. but anyway i got a few decent laps in and was my first...

well ive finised putting the ct9 turbo setup on my paseo now, but i only want to run low boost so its been to many years to remember how to set up the stock actuator for low boost. iirc low boost is 6psi and hi boost is 9psi ? ill be happy with 6 to keep things safe.

pretty much copied this from my post on the mx5nutz forum but just done a trackday in my Eunos roadster: I've still got hours and over 110 laps of incar footage in HD to edit, but heres some clips put together of exterior shots. the incar vids will follow in a few days current spec is...

well ive decided that now i have a baby on the way that i wont be getting much use of my eunos turbo anymore and the GT is far to harsh and fast for a baby, so im going to turbo the paseo (daily driver) question is what loom is easier to swap into the paseo, i have both a gt loom with fuse...

http://www.youtube.com/watch?v=OL11Etw7ZSg&list=UUgJRL30YS6XFxq9Ga8W2J3A&index=2&feature=plcp

anyone know where to get these for a reasonable price, there on ebay in the usa but with shipping comes to over 40£ Wicked-EP are the cheapest so for but still international shipping. im after manifold and downpipe flanges - this is for my new mazda manifold setup i might even take 2 of each...

im bored of my GT again and as ive decided to go stand alone im going for another new setup. currenty it has forged 5e 7.5.1 CR td05h 16g at 22psi emanage ultimate and all the other complementing mods now ive just bought/made 3" turbo back exhaust ( 2.5 previously) Link G3 stand alone ECU...