Search results

  1. E

    Plug Leads

    Hi ep'ers Anyone could confirm the part# for a set of NGK spark plug leads? I have one here but could not figure out if it fits the 4e. NGK (8128) TE41 Wire Set...
  2. E

    Fuel Rail Inlet Banjo Bolt Size

    As title says, any one would know the size of the thread on the banjo bolt on the inlet side from the stock fuel rail???
  3. E

    Confused c52 or c56

    Hi EP Guru's Just starting to sort out thing here for a gearbox rebuild for next year racing season. I got a EP82 engine for cheap but i need to rebuild the gearbox as it crunches into 2nd and 3rd gear. Im not a expert when it comes to gearboxes but im trying to sort it out by searching...
  4. E

    Preferred LSD for Drag Racing

    Hi mates, I know this has been covered in a bunch of threads and ive been most of the posts in the drivetrain section but i want to narrow down my choices and hear from the poeple who run their car mostly at the strip. What seems to be the best LSD for the drag strip?? Car is used for...
  5. E

    EP82 Gearbox rebuild kit

    Hi folks, I recently bought a EP82 gearbox for e real good bargain as previous owner said i was crunching 2nd and 3rd gear. So now im planning to rebuild it. For me its easier and ALLOT cheaper to get parts from the USA. I did a research and came across several rebuild kits...
  6. E

    size of the turbo oil return line???

    As topic says??? 10an / 12an?? Thanks
  7. E

    Which Garrett GTX Turbo??

    Hi guys, Im currently in the hunt for the new garrett GTX turbo. I have looked at 3 of them. The GTX2860R, GTX2863R, and the GTX2867R. So im sharing it here to get any advice of the EP gurus which would be the best option. Engine is fully forged with complete stand alone ECU with the primary...
  8. E

    Air and Coolant Temp Sensor Size

    As title says... Can anyone have a idea what the sizes the are of the stock air and coolant temp sensors that comes on the engine? Cheers.
  9. E

    MLS metal gasket

    Hi guys, My buddy recently finished of his forged build. The car started perfectly. But was a bit smokey. When we checked out it was the exhaust valve seal from cylinder 1 not sealing as it should. We are having them replaced now but his question is if he can re-use the mls gasket since he...
  10. E

    Forged 4E start up

    Hi mates, I recently finished a forged 4e build with all and everything new. waterpump, oilpump, all toyota gaskets, mls head gasket, arp headbolts and main studs, wossners pistons and scat rods with acl bearings and all other mods for a forgie. Im about to fire it up for the first time...
  11. E

    PRecision Turbo

    Hi mates, I just want to get your toughts on this turbo on a fully forged 4e. http://www.precisionturbo.net/turbochargers/entry-level-turbochargers/details/Entry-Level-Turbocharger---5454E-MFS/474 Are you trying to put together a cost effective turbocharger system for your vehicle...
  12. E

    Main Stud Kit

    Hi mates, Happy New Year to all. Can anyone please confirm that this kit will suite the 4E? ARP Toyota 4AG 16v Main Stud Kit - 203-5403 Tnks in advance:rockon:
  13. E

    Forging 4E

    Hello Turbo Friends, I tought its time to share some info with you. Im currently almost done with sorting parts out for my second 4E build. First one died due to wrong advice. But now after long nights of doing research and a bit of my own knowledge and the builders knowledge i decided its...
  14. E

    ACL Aluglide

    Hi, Im in process of forging another engine since the first one died and would like to get some opinion/advice on the ACL aluglide bearings. Will they be able to deal with 1.4 bar or above? Will be using cp or ross 74.5mm pistons together with scat hbeam rods. And also some advice on the head...
  15. E

    Extarnal Wastegate

    Hi mates, I have a t28 setup with internal wastegate at the moment but im planning to make it external to improve on. I have a custom made headers which was build specifically for a internal wastegate turbo. My question is now, can i weld in the ext wastegate in just one of the runners...
  16. E

    Haltech Sprint 500

    Hi I have joined TGTT for 2 years now but this is going to be my first post. Im from the Caribbean. The island Aruba. It is close to the coast of South america(Venezuela) I have a 1997 Toyota Tercel with an EP82. Im currently took out the stock ECU and is working now on a Haltech Sprint 500...
  17. E

    Intercooler Piping

    What pipe diameter to use on ct09 :)
Top